Feature
This small pneumatic vibrator design is simple,but still gives a
strong centrifugal force.Body made from an extruded
aluminum,refined steel roll in which the scrolling.This steel
roller by the two special high-impatc plastic cover positioning.The
housing has two horizontal and two vertical holes,making
installation easy.Air into two mutually perpendicular intake of an
entry.The two air intakes for the standard pipe thread.Is not a
block intake,supplied with a pipe plug.
Dimensions Table
Type | A | B | C | D | E | F | G | Weight(g) |
R-50 | 68 | 50 | 40 | 12 | 29 | 51 | 7 | 245 |
R-65 | 90 | 65 | 50 | 16 | 37 | 66 | 9 | 470 |
R-80 | 104 | 82 | 104 | 17 | 42.5 | 82 | 9 | 930 |
R-100 | 130 | 103 | 130 | 21 | 52 | 103 | 11 | 1795 |
Technical parameters
Type | Frequency(V.P.M) | Vibration power(N) | Air consumption(/min) |
0.2Mpa | 0.4Mpa | 0.6Mpa | 0.2Mpa | 0.4Mpa | 0.6Mpa | 0.2Mpa | 0.4Mpa | 0.6Mpa |
R-50 | 25.150 | 35.150 | 36.150 | 1.175 | 2.955 | 4.255 | 1.550 | 1.450 | 1.950 |
R-65 | 19.150 | 21.150 | 26.150 | 2.755 | 4.855 | 6.155 | 2.150 | 3.100 | 4.150 |
R-80 | 15.650 | 18.650 | 19.150 | 3.150 | 6.125 | 7.450 | 4.500 | 4.350 | 5.750 |
R-100 | 11.050 | 14.150 | 15.150 | 3.765 | 6.750 | 8.955 | 5.600 | 5.550 | 7.350 |
>
- Previous: NTP series Piston Reciprocating Type Ball Vibrator
- Next: SK Series Pneumatic Percussion Hammer