Active Member
|
[China]
Contact name:Vicky Lee
Huaswin Electronics Co.,Limited |
|
|
Flexible Printed Circuit 2 oz Copper PCB Circuit Board /
Immersion Gold PCB
Product Description
Shipping Method and Payment terms:
1. By DHL, UPS, FedEx, TNT using clients account.
2. We suggest you using our DHL, UPS, FedEx, TNT forwarder.
3. By EMS (Usually for Russia Clients), price is high.
4. By sea for mass quantity according to customer's
requirement.
5. By customer's Forwarder
6. By Paypal, T/T, West Union, etc.
Detailed Specification of Flexible PCB Manufacturing
Technical Specification | ||
Layers: | 1~10 (flex Pcb) and 2~8 (rigid flex) |
|
Min Panel Size: | 5mm x 8mm |
|
Max Panel Size: | 250 x 520mm |
|
Min Finished board thickness: | 0.05mm (1 sided inclusive copper) |
|
Max Finished board thickness: | 0.3mm (2 sided inclusive copper) |
|
Finished board thickness tolerance: | ±0.02~0.03mm |
|
Material: | Kapton, Polyimide, PET |
|
Base copper thickness (RA or ED): | 1/3 oz, 1/2 oz, 1oz, 2oz |
|
Base PI thickness: | 0.5mil, 0.7mil, 0.8mil, 1mil, 2mil |
|
Stiffner: | Polyimide, PET, FR4, SUS |
|
Min Finished hole diameter: | Φ 0.15mm |
|
Max Finished hole diameter: | Φ 6.30mm |
|
Finished hole diameter tolerance (PTH): | ±2 mil ( ±0.050mm) |
|
Finished hole diameter tolerance (NPTH): | ±1 mil ( ±0.025mm) |
|
Min width/spacing (1/3oz): | 0.05mm/0.06mm |
|
Min width/spacing (1/2oz): | 0.06mm/0.07mm |
|
Min width/spacing (1oz): | Single layer: 0.07mm/0.08mm |
|
Double layer: 0.08mm/0.09mm |
| |
Aspect Ratio | 6:01 | 8:01 |
Base Copper | 1/3Oz--2Oz | 3 Oz for Prototype |
Size Tolerance | Conductor Width:±10% | W ≤0.5mm |
Hole Size: ±0.05mm | H ≤1.5mm | |
Hole Registration: ±0.050mm |
| |
Outline Tolerance:±0.075mm | L ≤50mm | |
Surface Treatment | ENIG: 0.025um - 3um |
|
OSP: |
| |
Immersion Tin: 0.04-1.5um |
| |
Dielectric Strength | AC500V |
|
Solder Float | 288℃/10s | IPC Standard |
Peeling Strength | 1.0kgf/cm | IPC-TM-650 |
Flammability | 94V-O | UL |
PCB Assembly services:
SMT Assembly
Automatic Pick & Place
Component Placement as Small as 0201
Fine Pitch QEP - BGA
Automatic Optical Inspection
Through-hole Assembly
Wave Soldering
Hand Assembly and Soldering
Material Sourcing
IC pre-programming / Burning on-line
Function testing as requested
Aging test for LED and Power boards
Complete unit assembly (which including plastics, metal box, Coil, cable assembly etc)
Packing design
Conformal coating
Both dip-coating and vertical spray coating is available. Protecting non-conductive dielectric layer that is
applied onto the printed circuit board assembly to protect the electronic assembly from damage due to
contamination, salt spray, moisture, fungus, dust and corrosion caused by harsh or extreme environments.
When coated, it is clearly visible as a clear and shiny material.
Complete box build
Complete 'Box Build' solutions including materials management of all components, electromechanical parts,
plastics, casings and print & packaging material
Testing Methods
AOI Testing
· Checks for solder paste
·
Checks for components down to 0201"
·
Checks for missing components, offset, incorrect parts, polarity
X-Ray Inspection
X-Ray provides high-resolution inspection of:
· BGAs
· Bare boards
In-Circuit Testing
In-Circuit Testing is commonly used in conjunction with AOI minimizing functional defects caused by
component problems.
· Power-up Test
· Advanced Function Test
· Flash Device Programming
· Functional testing
Detailed Specification of Pcb Assembly
1 | Type of Assembly | SMT and Thru-hole |
2 | Solder Type | Water Soluble Solder Paste,Leaded and Lead-Free |
3 | Components | Passives Down to 0201 Size |
BGA and VFBGA | ||
Leadless Chip Carries/CSP | ||
Double-Sided SMT Assembly | ||
Fine Pitch to 08 Mils | ||
BGA Repair and Reball | ||
Part Removal and Replacement-Same Day Service | ||
3 | Bare Board Size | Smallest:0.25x0.25 Inches |
Largest:20x20 Inches | ||
4 | File Formats | Bill of Materials |
Gerber Files | ||
Pick-N-Place File(XYRS) | ||
5 | Type of Service | Turn-Key,Partial Turn-Key or Consignment |
6 | Component Packaging | Cut Tape |
Tube | ||
Reels | ||
Loose Parts | ||
7 | Turn Time | 15 to 20 days |
8 | Testing | AOI inspection |
X-Ray inspection | ||
In-Circuit testing | ||
Functional test |
