Active Member
|
[China]
Address: A001,6th Floor,Block A,Cross West,Fengcheng 7th Rd and Wenjing Rd,Xian 710007 P.R.China
Contact name:Kenneth
Xi'an Acme Measurement & Control Co., Ltd. |
|
|
high quality analog output Ceramic pressure sensors
APT215 Pressure Transmitter is flush diaphragm and process connection by thread and Clamp, which is outside install type level sensor, electronic connect parts by terminal box IP65,
We are specialized in pressure level measurement, pressure transmitter consists mainly of usually pressure sensor, ceamic pressure sensor, high temp. pressure sensor, flush disphragm pressure sensor, smart digital pressure sensor, wirelss pressure sensor etc.
Why you choose and trust us?
♦ Trade Assurance: 75 Transactions, total amount is above $ USD 200,000+ (from Jan to Jun, 2017)
♦ Near 50% buyers found pressure sensor and contact us
Description
The product is produced with military craft and has the characteristics of advanced design perfect technology, strict production superior device, superior management, perfect quality control system It has been sold in more than 40 countries.
Feature
used in refrigeration Industry
±0.5%FS,±1%FS accuracy
high stability , high reliability
ceramic sensor from German
digital calibration
multiple connectors and ports
CE compliant
ROHS compliant
Applications
Process control system
Compressor
Building Water supply
Hydraulic control
Air conditioner
Automotive engine
Automatic detection system
Hydraulic Pressure station
Refrigerator
| Pressure range | 0~200kPa...60MPa | |
| Pressure type | gauge (G ) | |
| Overload pressure | 150%FS | |
| Accuracy | 0.5%FS(typ.) ±1.0%F.S (max.) | |
| long-term stability | 0.5%FS/year(typ.) 1.0%FS/year(max.) | |
| temp.coefficient of zero | ±0.05%FS/°C(typ.) ±0.1%FS/°C(max.) | |
| temp.coefficient of span | ±0.05%FS/°C(typ.) ±0.1%FS/°C(max.) | |
| Operating temperature | -40°C~100°C | |
| compensate temperature | -10°C~80°C | |
| storage temperature range | -40°C~100°C | |
| Medium compatibility | All corrosive medium compatible with 1Cr18Ni9Ti | |
| Output signal | 4~20mA | 0.5~4.5V |
| Power supply | 10~30Vdc | 5V(ratio) |
| Load resistance | R≤(U-15)/0.02 (for 4/20mA) | R>100kΩ(for votage output |
| Insulating resistance | >100M Ω@100V | |
| electrical interface | packard,DIN43650,plug connection,cable connection,waterproof outlet | |
| pressure interface | M20x1.5, G1/4,G1/2,1/4NPT, 1/2NPT,7/16-20UNF (customer request) | |
| material of pressure membrane | ceramic | |
| material of housing | Cr18Ni9Ti stainless steel | |
| response time(10%~90%) | ≤10ms | |
| shock/impact | 10gRMS,(20~2000)Hz / 100g,11ms | |
| protection | IP65 | |
| certification | CE ,Ex ,ROHS | |
| EMC | EMI:EN50081-1/-2, EMS: EN50082-2 | |
FAQ
Q:What kind of products do you offer ?
A:We supply pressure sensor, level sensor, flow meter and digital controllers. Main market is European countries, American, the Middle East and Asia. Certificates are Europe one.
Q:Could I get samples?
A:Yes,we have materials in stock to help you to get the samples as
soon as we can.
Q:How about the quality of the magnets?
A:We have the certification of ISO, Europe standard ATEX, TUV-CE
and ROSH,we could send the certification test of our company to
you.
Q:Could you provide me the shortest lead time?
A:We have materials in our stock,if you really need,you can tell us
and we will try our best to satisfy you.
Q:Could I visit your factory?
A:Of course,if you need we will help you to visit our factory.
Q: How can I get the quotation or send my inquiry to?
A: Send your inquiry to us by the inquiry from on the right-side or the bottom of this page.
Or contact Ms. Anna Loh directly at (email: sales09 at holykell.com, Whatsapp&Viber 86-18473365257) you will get the reply within 12hours.
Q. How to order?
A. In order to send you correct level sensor and best offer, please provide the following information when you are send inquiry, thanks !
1. What is the process medium? Water, milk, wine or others.
2. Working Temperature? -30℃~80℃ or others?
3. Level range: 0-5m or..?
4. Output signal:4-20mA, RS485 or..?
