|
[China]
Trade Verify
Address: 99.QIANLUO ROAD QIANQIAO WUXI JIANGSU PROVINCE CHINA
Contact name:Tony Zou
JINQIU MACHINE TOOL COMPANY |
|
Verified Suppliers
|
|
|
3.2M Long Conventional CNC Press Brake Machine125T Bending Capacity SS Processing
supply high precision CNC hydraulic press brake machine, 110 ton CNC hydraulic press brake machine
130 tons press brake Machine Feature:
automatic CNC press brake machine equips the different CNC controllers to make multi-axis
controlling are optional.
Hydraulic / Mechanical press brake ram, synchronised positive stop design, ram stroke controlled
by precision mechanical nut depth stops built into each cylinder.
Parallelism is ensured by torsion bar that can be easily adjusted
by clutch system.
Segmented heavy duty 86° offset top punch is segmented for return
bend clearance,
complete with European style quick release punch holder with an adjustable wedge
clamping system for crowning.
Intermediate clamp has safety key to stop punch dropping.
Multi vee ('V') bottom die is made from one 3200mm solid die block
design to handle
heavy plate,
safety edge vee ('V') is incorporated in bottom die block.
Conveniently mounted control box on pendant for quick swivel and
adjustments.
Mono-block steel frame design, welded then machined to ensure
minimal bed deflection
under load
Enclosed rear gate with micro safety switches complete with sliding
rear door for easy access.
European quick release style top punch and clamping system,
allowing operator to change
position of tooling to suit multiple requirements on complex applications. This feature ensures
minimum down time, more productivity and results in reduced cost per finished product.
Specifications for 125T cnc press brake machine
| No. | Name | Unit | Parameter | |
| 1 | Nominal force | kN | 125 | |
| 2 | Length of worktable | mm | 3200 | |
| 3 | Distance between housing | mm | 2650 | |
| 4 | Throat depth | mm | 250 | |
| 5 | Ram Stroke | mm | 100 | |
| 6 | Max opening height | mm | 350 | |
| 7 | Adjustable stroke of ram | mm | 75 | |
8 | Speed of ram
| Idle running | mm/s | 40 |
| Pressing | mm/s | 8 | ||
| Retract | mm/s | 44 | ||
9 | Oil pump
| Model | 25MCY14-1B | |
| Pressure | MPa | 32 | ||
| Flow | Ml/r | 25 | ||
10 | Main motor
| Model | Y160M-6, B5 | |
| Power | kW | 7.5 | ||
| Speed | r/min | 970 | ||
11 | Motor for adjusting ram stroke | Model | AE-5634 | |
| Power | kW | 0.18 | ||
| Speed | r/min | 1370 | ||
| 12 | Backgauge motor | Model | Y80M2-6 | |
| Power | kW | 0.55 | ||
| Speed | r/min | 970 | ||
| Note: the backgauge fingers move 2.5mm and value dispalyed on the counter vary 2.5 digits when rotating the handwheel for one round. | ||||
| 13 | Rated pressure of hydraulic system | Mpa | 25 | |
14 | Overall Dimensions
| Length | mm | 3470 |
| Width | mm | 1725 | ||
| Height | mm | 2330 | ||
| 15 | Weight of machine | kg | 7800 | |
Main Structure of mechanical press brake
The frame is steel plate welded construction with high strength and
good rigidity.
Frame
The structure of machine is combined with the left and right side
frames, worktable, oil tank.
The worktable is seated at the bottom of left & right side frames, not only for improving the
strength and rigidity of machine, but also increase the heat radiation area of oil for normal
working of the hydraulic system.
Ram Mechanism
The ram is made from a integral plate and is connected together
with the piston rod in oil
cylinder,which is fixed on the left and right side frame to make piston rod driving ram moving
up and down through hydraulic system. In order to ensure the accurate positioning of the ram
at the upper and bottom dead point, and displayed on the counter, when the right and left
mechanical stop nut are not same height, you can adjust it as following procedure: at first to
take the right coupling off, then rotate the handwheel in specified direction to adjust ram untill
the both side mechanical nuts keep same height. The ram has been regulated when delivery,
user don’t need to adjust.
3' feet press brake Character for CNC hydraulic bending machine:
Pan making CNC Hydraulic Press Brake
CNC Press Brake, Plate bending Machoine
Pressure 300T working table length: 4500 mm Powe
CNC hydraulic Press Brake
Scope of Supply and Standard feature:
Ultra-Heavy Frame Structure, High rigidity full welded box frame with stress eliminating
by vibration.
The machine is equipped with reliable hydraulic system. To ensure minimum maintenance,
the integrated Mono-block hydraulic system and worldwide famous valves and seals are
adopted, And the pipeline
and connections are reduced to the minimum level. High efficiency pump with low level sound,
temperature gauge on oil filter and double-acting cylinders ensure high reliability and safety.
With overload protection.
The electrical components are selected in accordance with DIN or ISO standard, Which
mainly are made by Siemens.
Safety Guard.Professional CNC control system could be equipped, RT200 recommended.
Imported Charges or Tax for plate press brake machine:
Call your Customer.tell them machine HS code.
Spiral duct forming machine is 8455229090
Press brake and rolling machines are 84622990. shearing machine is 84623990.rolling
machine is 8455229090,seam welding machine is 85152900
Optional of small hydraulic pres brake:
sectional tooling with different length may store forming a certian length to bend the
closed frame wokpiece.
Automatic crowned deflection compensation
front pneumatic sheet support
two-hand control device
light curtain protection or laser protection
any tailor made are available on ewqueste.
electrical power press brake machineTechnical Data:
download brochure here
CNC hydraulic press brake machine.pdf
Machine picture for press brake tooling
