Active Member
|
[China]
Address: Wenchang Rd, Licang District, Qingdao, China
Contact name:Eric
Qingdao National Premium Oilwell Machinery Co.,Ltd |
|
|
| No. | P/N(HHF-1300/1600) | Description | Qty |
| 1 | 11-3131-0201-00 | Cover, main bearing | 2 |
| 11-3161-0201-00 | Cover, main bearing | 2 | |
| 2 | 11-3131-0202 | Sleeve, main bearing (right) | 1 |
| 11-3161-0202 | Sleeve, main bearing (right) | 1 | |
| 3 | 11-3161-0203 | Gasket | 2 |
| 4 | 11-3161-0204 | Insider retainer | 2 |
| 5 | 11-3131-0205-00 | Outside retainer | 3 |
| 11-3161-0205-00 | Outside retainer | 3 | |
| 6 | 11-3131-0206 | Eccentric strap | 3 |
| 11-3161-0206 | Eccentric strap | 3 | |
| 7 | 11-3161-0207 | Positioning ring (I) | 1 |
| 8 | 11-3161-0208-00 | Crankshaft | 1 |
| 9 | 11-3161-0209 | Positioning ring (II) | 1 |
| 10 | 11-3131-0210 | Bull gear | 1 |
| 11-3161-0210 | Bull gear | 1 | |
| 11 | 11-3131-0211-1 | Bolt, 1 1/2-8UN-2A*130 | 12 |
| 11-3161-0211-2 | Bolt, 1 1/2-8UN-2A*170 | ||
| 12 | 11-3161-0212 | Spacer ring | 2 |
| 13 | 11-3131-0213 | Sleeve, main bearing (left) | 1 |
| 11-3161-0213 | Sleeve, main bearing (left) | 1 | |
| 14 | 11-3131-0214 | Retainer ring | 2 |
| 11-3161-0214 | Retainer ring | 2 | |
| 15 | 11-3161-0215 | Baffle | 2 |
| 16 | 11-3161-0216 | Bolt, main bearing, 3-8UN-3A | 4 |
| 17 | 11-3161-0217 | Shims | As required |
| 18 | 11-3161-0218 | Screw, 5/8-11UNC-2A*120 | 2 |
| 19 | 11-3161-0219-00 | Locking nut, 1 1/2-8UN-2B | 12 |
| 20 | 11-3161-0220 | Bolt, 5/8-11UNC-2A*40 | 70 |
| 21 | 11-3161-0227 | Bolt, 5/8-11UNC-2A*50 | 28 |
| 22 | 11-3131-0221-1 | Bearing, eccentric strap, 928/660.4QU | 3 |
| 11-3161-0221-2 | Bearing, eccentric strap, 929/660.4QU | ||
| 23 | 11-3131-0222-1 | Main bearing, 3G4053160H | 2 |
| 11-3161-0222-2 | Main bearing, 3G3003760HY | ||
| 24 | B0848-16-32 | Flat washer, 16 | 28 |
| 25 | 11-3161-0224 | Locking wire, SZ-1.50 | 40m |
| 26 | 11-3161-0225 | Locking wire, SZ-3.00 | 3m |
| 27 | 11-3161-0226 | Sealant | 90ml |
| 28 | 11-3161-0223 | Screw, 5/8-11UNC-2A*100 | 2 |
| No. | P/N(HHF-1300/1600) | Description | Qty |
| 1 | 11-3161-0301 | Key, 2"*2"*241.3 | 1 |
| 2 | 11-3131-0302/11-3161-0302 | Pinion Shaft | 1 |
| 3 | 11-3161-0303 | Sleeve, Seal | 2 |
| 4 | 11-3161-0304 | End Cover | 2 |
| 5 | 11-3161-0305 | Gasket, End cover | 2 |
| 6 | 11-3161-0306 | Gasket, Bearing housing | 2 |
| 7 | 11-3161-0307 | Bearing Housing | 2 |
| 8 | 11-3161-0308 | Retainer Ring | 2 |
| 9 | 11-3161-0309 | Gasket, Oil trough | 2 |
| 10 | 11-3161-0310-00 | Oil trough | 2 |
| 11 | 11-3161-0314 | Bolt, 1/2-13UNC-2A*35 | 24 |
| 12 | 11-3161-0315 | Bolt, 7/8-9UNC-2A*52 | 16 |
| 13 | 11-3161-0311 | Oil Seal, 9.125"*10.375"*0.625" | 2 |
| 14 | 11-3161-0312 | Bearing, 4G32844H | 2 |
| 15 | B0093-22-59 | Spring Washer, 22 | 16 |
| 16 | B0093-14-59 | Spring Washer, 14 | 24 |
| 17 | 11-3161-0313 | Flange | 1 |
| 18 | 11-3161-0316 | Bolt, 5/8-11UNC-2A*50 | 3 |
| 19 | B0093-16-59 | Spring Washer, 16 | 3 |
| No. | P/N(HHF-1300/1600) | Description | Qty |
| 1 | 11-3161-0401 | Crosshead | 1 |
| 2 | 11-3161-0402 | Slide, Upper | 1 |
| 3 | 11-3161-0403-00 | Shim | 8 |
| 4 | 11-3161-0404 | Shim | 2 |
| 5 | 11-3161-0405 | Stuffing Box | 1 |
| 6 | 11-3161-0406 | Oil Seal | 1 |
| 7 | B34521-190-355-69 | O Ring, 190*3.55G | 1 |
| 8 | 11-3161-0407 | Oil Seal, 5"*6.25"*0.625" | 2 |
| 9 | 11-3161-0408 | Gasket | 1 |
| 10 | 11-3161-0409 | End Cover | 1 |
| 11 | 11-3161-0410 | Locking Spring | 1 |
| 12 | 11-3161-0411 | Baffle | 1 |
| 13 | 11-3161-0412 | Crosshead extension rod | 1 |
| 14 | 11-3161-0413 | Crosshead Pin | 1 |
| 15 | B34521-125-700-69 | O Ring, 125*7.0G | 1 |
| 16 | 11-3161-0420 | Screw, 3/4-10UNC-2A*65 | 8 |
| 17 | 11-3161-0414 | Gasket | 1 |
| 18 | B34521-160-700-69 | O Ring,160*7.0G | 1 |
| 19 | 11-3161-0415 | Slide, Lower | 1 |
| 20 | 11-3161-0416 | Crosshead Pin Cap | 1 |
| 21 | 11-3161-0417 | Crosshead Bearing, 254941QU | 1 |
| 22 | 11-3161-0418 | Pipe Joint, NPT3/8*50.8 | 2 |
| 23 | 11-3161-0421 | Bolt, 1-8UNC-2A*60 | 2 |
| 24 | 11-3161-0422 | Bolt, 1-8UNC-2A*70 | 14 |
| 25 | 11-3161-0419 | Slide retainer plate | 8 |
| 26 | 11-3161-0423 | Bolt, 3/8-16UNC-2A×40 | 4 |
| 27 | B0093-10-59 | Spring Washer, 10 | 4 |
| 28 | 11-3161-0424 | Steel Wire Φ1.6 | As required |
| 29 | 11-3161-0425 | Lock-fife | 25ml |
All our fluid end parts are manufactured to API 7K quality standards.
Parts are available for these popular pump models:
BOMCO/Emsco Mud Pumps:F2200HL, F1600HL, F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,
LS National Mud Pumps: 3NB-500C, 3NB1000C, 3NB1300C, 3NB1600
Ideco Mud Pumps: T-500, T-800, T-1000, T-1300, T-1600,
National Mud Pumps: 7P50, 8P80, 9P100, 10P130, 12P160, N1300, C-250, K-700, 14-P-220,
E-700/G-1000, K-500, K-380, K-500A/700A, C-250/350, JWS-400,
Gardner Denver Mud Pumps: PZ7, PZ8/9, PZ10/11, FK-FXK, FY-FXD, FD-FXX, FG-GXG, FG-FXG,
KG-KXG, FQ-FXQ, FF-FXF, FF-FXP,
Oilwell Mud Pumps: A-560/600-PT, A-850-PT/A-1100-PT, A-1700-PT/A-1400-PT
Wirth Mud Pump: TPK1000, TPK1600, TPK 2000,TPK2200
Russian Mud Pumps: UNBT-950, UNB-600, 8T-650, UNBT650, NBT600, UNB1180, UNB1180L, NB125, NB80, NB50, NB32
WEATHERFORD/Ellis Williams: E-447, E-2200
Drillmec Mud Pump: 9T1000, 12T1600, 7TS600, 7TS500, 9T800
Romania Mud Pump: 3PN-1000, 3PN-1600, 3PN-2000
And other brand spare parts for WIRTH, OPI, Ellis Williams, Wilson, Gaso, Skytop/Brewster.
