TORICH INTERNATIONAL LIMITED |
Verified Suppliers
|
|
TORICH High Tensile Thin Wall 34mm MS 1010 Plastic End Caps for AISI 1020 46mm 4130 Carbon Seamless Mild ASTM A513 1026 DOM Tube
Steel Grade/Steel Material:
E155 E195 E235 E275 E355
Delivery Condition:
N Normalized
Size Range:
O.D.:4-80mm
W.T.:1-8mm
L:max 6000mm
Characteristic:
Good concentricity
Good OD and ID tolerance
High precision
Stable quality
Smooth roughness
DOM Steel Tube Production Process:
Raw material → Incoming inspection → Cutting → Heating → Piercing → Hammering →Pickling → Cold-drawing → Heat treatment → Physical chemistry test → Straightening → Ends cutting → Final inspection → Bundling →Storage
Standard | Steel Grade | C | Si | Mn | P | S |
EN 10305-1 | E215 | ≤0.10 | ≤0.05 | ≤0.70 | ≤0.025 | ≤0.025 |
E235 | ≤0.17 | ≤0.35 | ≤1.20 | ≤0.025 | ≤0.025 | |
E355 | ≤0.22 | ≤0.55 | ≤1.60 | ≤0.025 | ≤0.025 | |
DIN 2391 | St35 | ≤0.17 | ≤0.35 | ≥0.40 | ≤0.025 | ≤0.025 |
St37.4 | ≤0.17 | ≤0.35 | ≥0.40 | ≤0.025 | ≤0.025 | |
St45 | ≤0.21 | ≤0.35 | ≥0.40 | ≤0.025 | ≤0.025 | |
St52 | ≤0.22 | ≤0.55 | ≤1.60 | ≤0.025 | ≤0.025 | |
GB/T 3639 | 10 | 0.07-0.13 | 0.17-0.37 | 0.35-0.65 | ≤0.030 | ≤0.030 |
20 | 0.17-0.23 | 0.17-0.37 | 0.35-0.65 | ≤0.030 | ≤0.030 | |
35 | 0.32-0.39 | 0.17-0.37 | 0.50-0.80 | ≤0.030 | ≤0.030 | |
45 | 0.42-0.50 | 0.17-0.37 | 0.50-0.80 | ≤0.030 | ≤0.030 | |
Q345B | ≤0.20 | ≤0.50 | ≤1.70 | ≤0.030 | ≤0.030 |
Production Steel Tube:
Eddy Current Test and Ultrasonic Test:
Packing: