Automatic Cutting Surgical Face Mask Tie On Pp Spunbond Non Woven Fabric 2cm Width

Automatic Cutting Surgical Face Mask Tie On Pp Spunbond Non Woven Fabric Blue / White 2cm Width

Non-woven fabric is made of oriented or random fibers. It is a new generation of environmentally friendly materials. It is moisture-proof, breathable, flexible, light, non-combustible, easy to decompose, non-toxic and non-irritating, rich in color, and price. Low cost, recyclable, and so on. For example, polypropylene (pp material) pellets are used as raw materials, which are produced by high-temperature melting, spinning, paving, and hot-rolling and continuous one-step process. It is called cloth because it has the appearance and some properties of the cloth.

Therefore, in the non-woven fabric, S, SS,SSS, SMS mean the following:

S: spunbonded non-woven fabric = hot-rolled single-layer web;

SS: spunbonded nonwoven fabric + spunbonded nonwoven fabric = hot rolled from two layers of web;

SSS: spunbonded nonwoven fabric + spunbonded nonwoven fabric + spunbonded nonwoven fabric= hot rolled from three layers of web;

SMS: spunbond non-woven fabric + meltblown non-woven fabric + spunbond non-woven fabric = three-layer fiber mesh hot rolled.

Product Specification

Usage of PP spunbonded non woven fabric
1). 10~40gsm Medical field: Face mask; Surgical gown, protective clothes, operation cover, cap, shoe cover, bed sheet etc
2). 10~40gsm Sanitary and Health: Baby & adult diaper, sanitary napkins, hygiene pad, pet pad etc.
3). 17-100gsm Agriculture and horticulture covers
4). 50~100gsmShopping bags, suit bags, promotional bags, gift bags.
5). 50~120gsm for home textile:wardrobe, storage box,bed sheets, table cloth, sofa upholstery, home furnishing, handbag lining, mattresses,wall and floor cover, shoes cover.

The polypropylene materials rated better than others in testing. The layers of fine fibers that make up the material are better at blocking airborne particles from entering and exiting the respiratory system.

Outer & Inner Layer
In disposable face masks, medical masks, and KN95/N95 masks, you will find that the nonwoven spunbond polypropylene materials are ideal for the outer and inner layers of the mask.
The nonwoven spunbond polypropylene is a breathable material. This allows for splash resistance on the outer layer. It is useful as the inner layer because it is absorbent and whisks moisture away from the face.

Middle Layer
The middle layer between the two pieces of nonwoven spunbond polypropylene is made of a nonwoven meltblown fabric.
The meltblown fabric in mask production acts as the filtration mechanism between the layers of nonwoven spun-bonded polypropylene that helps to prevent the spread of germs.