Zhejiang THOR Electric Co., Ltd |
|
Series and parallel waterproof LED street lamp 10KV withstand voltage protector and lightning protector
Brief introduction
LED lamp surge protector is a product designed for LED
power supply system based on relevant standards. It is installed in
the lampshade of LED lamps or in the control cabinet. It is applied
to many outdoor lighting systems such as LED street lamp, tunnel
lamp, outdoor landscape lamp and so on. Different versions of the
design are mainly to meet the different lines, divided into line
connection and terminal connection two wiring ways, some versions
also equipped with signal (DALI, RS485, 0-10V) protection function,
mainly to meet the monitoring and regulation function of the LED
lighting system.
Product features
1. can realize water release and explosion-proof
2. high precision constant current output
3. with the power status indication, indicating the
working state of surge protector.
Product specification
1.Rated Operating Voitage(UC):275V
2. Voltage protective level(UP):0.8KV
3. Max discharge current(IMAX):6KA
4. Nominal discharge current(IN):3KA
Working principle of product
When the surge protector has no voltage, the impedance
is very high, which means that the circuit breaker is open. When
the voltage occurs, the impedance drops to a few Europe, and the
surge current will flow through the surge protector and will not
enter the device. At the same time, because the surge protector has
a small impedance at this time, the voltage on both sides of the
surge is relatively small, and because he is in parallel with the
protected equipment, it prevents the equipment from suffering from
large surge power. Pressure, so as to play the effect of discharge
and pressure limiting.
Use of attention
1. determine the discharge current path
2. torpedo must be disconnected when installing and
maintaining, and no live operation is strictly prohibited. Y is in
case of electric shock.
3. after correct installation, it can work steadily for a
long time. If it is found that the transmission performance of the
system is reduced or the signal is interrupted due to the cause of
surge protection, it should be maintained or replaced in time.
Company profile
Thor is all about protecting against the damaging effects of power
transients. It is our goal and mission to connect our customer
challenges with high-quality, right-priced solutions and products –
completed by unrivaled customer service and technical support.
Thor has been designing new products to meet the RoHS directive
since 2006. Thor’s ongoing commitment to RoHS compliance includes
continuing efforts to reduce the presence of hazardous substances
in the design and manufacture of a growing number of popular
products.
Product packaging:Carton packing
Transportation method
2. Trains, ships, aircraft transport