60 Amp 72v Electric Bike Controller / Electrical Bicycle Controller For Cycle Analyst

18mosfets 4110 72v 60amp controller suitable for Cycle Analyst

Specifications:  Quick detai

• Voltage : 72v
• Warranty : 1 years
• Max current: 60amp
• Brake: low brake
• Voltage range: 40-95V
• Mosfet : 18 mosfet 4110
• Programmable via computer

18 fet 4110, 36-75V Infineon Controller

Includes following functions as standard (we strongly recommend our matching throttle are also purchased to make use of all functions and for plug and play simplicity):

• Throttle connection with Integrated push button cruise, separate 3 speed connection (Full and Half Twist include integrated 3Sp and Cruise, Thumb Throttle is not integrated, but still includes all the same functionality with appropriate parts
• Correctly Connected Cycle Analyst plug, with Shunt Value Marked on case for CA Shunt calibration
• Programming header for simple programming flash via USB program cable (program cable is an optional extra)
• E-brake with Motor kill and Regen. (jumper enabled)
• Remote low power ignition switch connection (bar mounted power switch available). Zero current drain when low power switch is powered off, so not necessary to disconnect when not in use, avoiding the sparks and damage that the uncontrolled current surge can cause

Fully programmable using the optional USB program cable. The following functions/parameters can be modified:

• Battery and Phase current (inferred, not measured) can be independently adjusted
• Low Voltage Cut
• High Voltage Cut, or regen. Voltage Limit
• 3 programmable speed settings
• Various Pedal Assist and Re-Gen braking parameters can be adjusted

Specification:

• 18pcs of Genuine IRFB4110 Mosfet . Just about the best 100V TO-220 Mosfet available
• 100V Rubycon Caps, Max input voltage is recommended 90V (charge voltage)
• Recommended 36-75V operation, 90V max
• 60A Current Limit
• 6mm2 (>10AWG) High Temperature Silicone wires used on Phase and Supply cables
• Dimension: 257 * 85 * 45mm
• Weight: 0.84kg