|
[China]
Trade Verify
Address: Address:No 8 Dejin Industrial Park Lishui Twon,Nahai,Foshan Guangdong China
Contact name:Ye
Foshan Subole Electronic Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
2 Channel T10 from 2 X 1000W professional power amplifier in 2U balck
Description
1, Output Power: Class A amplifiers typically have a lower output power compared to other amplifier classes. The maximum output power is limited by the biasing scheme and the power capabilities of the output devices.
2, Heat Dissipation: Due to the continuous conduction of the output devices, Class A amplifiers generate a significant amount of heat. Adequate heat dissipation measures, such as heat sinks or fans, are necessary to prevent overheating and ensure reliable operation.
3, Size and Weight: Class A amplifiers tend to be larger and heavier compared to other amplifier classes because of the heat dissipation requirements and the need for larger output devices.
Quick Detail
| Model | T10 |
| 8ΩStereo Power | 2×1000W |
| 4ΩStereo Power | 2×1500W |
| 8ΩBridge Mono Power | 3000W |
Frequency Response | 20Hz-20KHz(±0.5dB) |
| THD,1KHz/8Ω | ≤0.05% |
Noise A-weighting | ≥102dB |
Damping Coefficient | ≥300 |
Slew Rate | ≥10V/uS |
Input Sensitivity | 0.775V |
Input Impedance(Equilibrium/Disequilibrium) | 20KΩ/10KΩ |
Output Type | Class A |
Cooling | Non-grading fan speed |
Protection | DC / short circuit / overload / overheat protection / distortion pressure line / boot volume fade in |
Input | Balanced input XLR female socket / balanced and connected XLR male socket |
Output | Speakon(NL4) |
Panel | Power switch / independent channel volume control knob / power indicator / signal indication / peak clipping indication / protection indication |
Backplane | Mode switch |
| Dimension | 482×429.5×88(mm) |
Advantage Of Factory
Our company was established in 1998, specializing in the development, production, and sales of audio electronic products for over 20 years. Complete equipment, advanced production technology, multiple high-efficiency assembly lines, semi-automatic production, ensuring quality and quantity. With strong technology and advanced management experience, perfect after-sales service (for example: after-sales troubleshooting, maintenance consulting, spare parts replacement, etc.) based on the forefront of the audio industry, dedicated to new and old customers for a better tomorrow.
