Active Member
|
[China]
Address: Auxiliary room 310,C-SPAN,Plant 7,Sanyi Automobile Manufacturing Co.,Ltd,No.1 Sanyi Road,Changsha Economic and Technological Development Zone
Contact name:Queenven
Changsha Zondar Intelligent Technology Co., Ltd. |
|
|
4 Inch Solid Water Pump, Hydraulic Water Pump
Product description:
4 inch solid water pump, hydraulic water pump are designed for continuous pumping of water on building sites, in flooded excavations and cellars and in similar situation. This pump can handle stringy solids and can be used for jobs such as Bilge Pumping, Jobsite Dewatering, Wastewater Transfer, Oil Skimmers, Vault Pumping and Grit Chamber Cleanouts.
Product features:
1. Larger conveying capacity
It can transport a larger amount of water, mud, mortar, etc. The pump adopts steel pump body, cast impeller with cast iron material, and special eddy current design.
2. High safety performance
There is no cable, so that potential safety hazards of leakage can be avoided.
3. Strong performance
It is driven by a hydraulic motor with a special drive shaft, oil seal and bearing built-in. The hydraulic oil is cooled and lubricated, so it can run dry without damage.
Performance technology parameter configuration
| Model | ZDTP03 | ZDTP04 |
| Flow(m³/h) | 100 | 200 |
| Maximum flying dust/m | 25 | 16 |
| Weight/kg | 11 | 27 |
| Outfall/mm | 75 | 100 |
| Size/mm | 300×200×400 | 470×340×480 |
| Pumped maximum particle/mm | 70 | 80 |
| Operational pressure/Mpa | 10.5-14 | 10.5-14 |
| Operational flow/Lpm | 20-30 | 30-40 |
