|
[China]
Trade Verify
Address: Room 303, Block D, Building 1, International Enterprise Center, Environmental Protection Road, Yuhua District, Changsha City, Hunan Province, China
Contact name:Jason
Hunan Zikun Information Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
ZC-2006P PoE Switch 4 POE ports 1 GE SFP+5*GE RJ45 Switching capacity 12G DC or AC
To fulfill the demand of High Power PoE for network applications
with Gigabit transmission, ZC-S2006P PoE Gigabit Ethernet Switch is
an ideal solution. Each 10/100/1000Mbps port of the ZC-2006P
features IEEE 802.3af and IEEE 802.3at Power over Ethernet (PoE)
that combine up to 65-watt PoE budget on the whole system, It is
designed specifically to satisfy the growing demand of higher power
consuming network PD(powered devices) such as PTZ (Pan, Tilt &
Zoom) / speed dome network cameras, multi-channel (802.11a/b/g/n)
wireless LAN access points and other network devices by doubling
PoE power, more than the current conventional 802.3af PoE.
All RJ45 copper interfaces of the ZC-2006P support 10/100/1000Mbps
auto-negotiation for optimal speed detection through RJ45 Category
6, 5 or 5e cables. It also supports standard auto-MDI/MDI-X that
can detect the type of connection to any Ethernet device without
requiring special straight or crossover cables. 1extra 1.25Gbps SC
interface can be used for uplink.
Typical applications please refer to following picture
Features
. Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE
802.3ab 1000BASE-T
. 4-Port 10/100/1000Mbps supports 52V DC power to PoE Powered
Device
. 1 RJ45 10/100/1000Mbps for uplink
. 1 1.25Gbps SFP interface for uplink
. Complies with IEEE 802.3af/802.3at Power over Ethernet End-Span
PSE
. Up to 4 IEEE 802.3af devices powered
. Supports PoE Power up to 15.4 watts for each PoE port
. Up to 4 IEEE 802.3at devices powered
. Supports PoE Power up to 30 watts for each PoE port
. 65-watt PoE budget
. Auto detects powered device (PD)
. Circuit protection prevents power interference between ports
. Remote power feeding up to 100m
. Hardware based 10/100/1000Mbps auto-negotiation and auto
MDI/MDI-X
. Features Store-and-Forward mode with wire-speed filtering and
forwarding rates
. IEEE 802.3x flow control for full duplex operation and back
pressure for half duplex operation
. Integrates address look-up engine, supporting 8K absolute MAC
addresses
. 2M packet buffer
. 10K Jumbo frame supports at 1000Mbps duplex mode
. IEEE 802.1QVLAN packet transparency support
. Automatic address learning and address aging
. Made of metal, desktop size and wall-mount design
Technical Specifications
| Item | Description | |
| Model | ZC-S2006P | |
Power Supply | Power Supply Mode | Power adapter |
| Voltage Range | AC 100～240V | |
| Power Consumption | The device <5W, POE power supply <65W | |
Network Port Parameter |
Network Ports | 1～4 Ports: 10/ 100/ 1000Mbps Ethernet port, adaptive control Uplink 1 RJ45: 10/ 100/ 1000Mbps Uplink 1 SFP:1.25Gbps |
Transmission Distance | 1~4 Ethernet Port:0~100m Mandatory 10 Mbps reach up to 250m 1 SFP: According to different optical module | |
| Transmission Media | 1~5 Ethernet Port:Cat5e/6 standard UTP cable, Fiber: LC interface optical fiber | |
| POE Agreement | IEEE802.3 af/at standards | |
| PoE Power Supply Mode | End-span method | |
| PoE Power Supply Wattage | Each port≤30W,Whole device<65W | |
Network Switch Specification | Network Standard | IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3ab 1000BASE-T |
| Swap Mode | Store-and- forward | |
| Switch Capacity | 12Gbps | |
| MAC Address List | 8K | |
Status Indicators | Power Indicator Light | One power light (green) |
| Optical Fiber Port Indicator | One fiber link indication light ( green), Green light keeps on when the fiber port is well connected | |
| PoE Indicator | 1~4 PoE indicator light(yellow) | |
| PoE Network Port LED | 1~5 port ( green light on RJ45 jack) Keeps on when normally connected, Blinking when transceiver data | |
Protection Level | Surge Immunity | Level 3, executive standard:IEC61000-4-5 |
Electrostatic Protection | 1a touch electric discharge: level 3 1a Air discharge: level 3 Executive standard:IEC61000-4-2 | |
Operating Environment | Working Temperature | - 10℃~55℃ |
| Storage Temperature | -40℃-85℃ | |
Humidity(non-congeal ) | 0~95% | |
Mechanical Attributes | Dimensions (L*W*H) | 202X140X45MM |
| Color | Black | |
| Weight | 1kg | |
