30Mpa Electrical Grease Transfer Pump 420-470mm Tank Height

electric grease pump manufacturer,24V grease oil electric lubrication pump

As everyone knows, the electric grease pump is a new type of high pressure lubricator, oil filling equipment is powered by compressed air, the pump fuel produced to make the role of high-pressure, high-pressure oiling, suitable for automotive, bearings, tractors and other power machinery grease filling operation, remarkable importance of electric grease pump, so in order to make people more people will use it for the maintenance and upkeep of it, that let people try to understand its maintenance measures.

1. the use of butter must be clean and must not contain any impurities and moisture.

2. please remove most of the material containing a large amount of solvent in the oven, and then use the oil pump to evacuated.

3. water will corrode the oil pump, so the water containing material is forbidden to use the oil pump to vacuum.

4. clean surface antirust oil;

5. after the use of vacuum oven, be sure to do a good job of cleaning, clean the glass window of the vacuum oven.

6. use the vacuum pump in the correct order to prevent the phenomenon of suction.

7., the rust preventive oil in the fuel pipeline should also be removed before application. The fuel will be connected to the fuel injection pump pipeline, and the rotary shaft of the fuel injection pump must be continuously rotated until the outlet valve seat is sprayed clean.

8. remove the antirust oil from the inner cavity of the governor and the inner cavity of the injection pump, and add the lubricating oil with the specified brand.

9. it is necessary to use properly labeled butter.

Spec:

Picture: