Active Member
|
[China]
Address: 8F., No. 96, Sec. 3, Zhongxiao E. Rd., Da’an Dist., Taipei City 106, Taiwan
Contact name:
Kasmac Industries Co., Ltd. |
|
|
Descriptions :
This machine is the basic type of shape molding machine, main features are as follows :
Machine structure:
The frame is welded by quality steel, high strength and good stability.
Rack failure annealed after welding heat treatment. Using imported CNC machining center. The underlying fine uses sand blasting, galvanizing and the overall surface painted, high corrosion resistance.
Moving template guide and bearing separation, prolong the service life of the guide post.
Technique :
Three sewage pipe technology, the fixed mold, moving mold and vacuum systems are working independently.
Operation :
Four kinds operating mode: automatic, semi-automatic, middle starting and manual.
Safety door has three kinds protection devices: safety door switch, pause switch and emergency stop.
Electronic Control:
Controlled by programmable controller and color touch screen, easy to operate.
The main parts (CPU template, touch screen, start parts, hydraulic parts, pumps, etc.) are all international and domestic famous brands.
Production control and management can be operated by computer, high degree of automatic, easy to operation and maintenance.
| Main Technical Parameters | ||||
| Model | FW-Z1513S | FW-Z1715S | FW-Z1816S | |
| Standard mould size (mm) | 1500x1300 | 1750x1550 | 1850x1600 | |
| Rear window size (mm) | 1350x1150 | 1600x1400 | 1700x1450 | |
| Max. production size (mm) | 1330x1130 | 1580x1380 | 1680x1430 | |
| Max. thickness size (mm) | 400 | 400 | 400 | |
| Steam system | Main pipe pressure (kg/cm2) | 5~6 | 5~6 | 5~6 |
| Inlet size (mm) | DN80 | DN100 | DN100 | |
| Mould inlet | 1.5inch x 6pcs | 1.5inch x 8pcs | 1.5inch x 8pcs | |
| Control type | Angle valve | |||
| Steam valve | Single | |||
| Inlet pressure (kg/cm2) | 5~6 | 5~6 | 5~6 | |
| Consumption (kg/cycle) | 3.5~9.5 | 6~12 | 6~15 | |
| Air system | Main pipe pressure (kg/cm2) | 5~6 | 5~6 | 5~6 |
| Inlet size (mm) | DN80 x 2pcs | DN80 x 2pcs | DN80 x 2pcs | |
| Inlet pressure (kg/cm2) | 5~6 | 5~6 | 5~6 | |
| Consumption (m3/cycle) | 1.5~1.8 | 1.6~2.2 | 1.6~2.4 | |
| Cooling water system | Main pipe pressure (kg/cm2) | 3~5 | 3~5 | 3~5 |
| Inlet size (mm) | DN80 | DN80 | DN80 | |
| Mould inlet | 1inch x 6pcs | 1inch x 8pcs | 1inch x 8pcs | |
| Inlet pressure (kg/cm2) | 3~5 | 3~5 | 3~5 | |
| Consumption (kg/cycle) | 45~110 | 50~120 | 55~130 | |
| Temperature (℃) | 45~55 | 45~55 | 45~55 | |
| Vacuum system | Vacuum motor (kw) | 5.5 | 7.5 | 7.5 |
| Vacuum inlet size (mm) | DN80 | DN80 | DN80 | |
| Drainage size (mm) | DN65 | DN65 | DN65 | |
| Pipe size (mm) | DN15 | DN15 | DN15 | |
| Inlet pressure (kg/cm2) | 3~5 | 3~5 | 3~5 | |
| Consumption (kg/cycle) | 15~30 | 15~30 | 15~30 | |
| Temperature (℃) | 20~30 | 20~30 | 20~30 | |
| Drainage system | Outlet size (mm) | DN150 | DN150 | DN150 |
| Mould outlet | 1.5inch x 6pcs | 1.5inch x 8pcs | 1.5inch x 8pcs | |
| Hydraulic system | Motor (kw) | 5.5 | 7.5 | 7.5 |
| Pump (L/min) | 30+85 | 30+121 | 30+121 | |
| Max. lock pressure (T) | 22 | 36 | 36 | |
| Oil box volume (L) | 290 | 340 | 340 | |
| Moving Cylinder (mm) | φ100 x 2pcs | φ125 x 2pcs | φ125 x 2pcs | |
| Demould cylinder (mm) | φ50 x 2pcs | φ50 x 2pcs | φ50 x 2pcs | |
| Hopper system | Hopper volume (L) | 300 | 420 | 420 |
| Refilling blower (kw) | 1.5 | 2.2 | 2.2 | |
| Outlet (pcs) | 44 | 44 | 44 | |
| Demould system | Demould system | Hydraulic | ||
| Demould frame | Shutters | |||
| Chamber pressure control | Digital gauge | Digital gauge | ||
| Rod diameter (mm) | φ70 x 4pcs | φ85 x 4pcs | φ85 x 4pcs | |
| Foundation high (mm) | 1600 | 1600 | 1600 | |
| Cycle time (S/cycle) | 55~110 | 70~140 | 70~150 | |
| Connect load (kw) | 12.5 | 17.2 | 17.2 | |
| Dimension (LxWxH) (mm) | 5000x2300x3200 | 5000x2600x3400 | 5000x2700x3500 | |
| Weight (kg) | 6000 | 7000 | 7500 | |
