Active Member
|
[China]
Address: ROOM 614 6/F HONG KONG PLAZA 188 CONNAUGHT ROAD WEST HK
Contact name:Michael Zhu
EVER BEST(HK) LIMITED |
|
|
Quick Detail:
| LUPOL LW4405 | ||||
| Injection Molding, PP/GF/MF | ||||
Description |
Application | |||
| General Purpose | Electrical & Electronic, Automotive Parts | |||
Properties |
Test Condition |
Test Method |
Unit |
Typical Value |
Physical | ||||
| Specific Gravity | ASTM D792 | - | 1.22 | |
| Molding Shrinkage (Flow), 3.2mm | ASTM D955 | % | ||
| Melt Flow Rate | 230℃/2.16kg | ASTM D1238 | g/10min | 3.0 |
Mechanical | ||||
| Tensile Strength, 3.2mm | ASTM D638 | |||
| @ Yield | 50mm/min | kgf/cm2 | 920 | |
| Tensile Elongation, 3.2mm | ASTM D638 | |||
| @ Yield | 50mm/min | % | - | |
| @ Break | 50mm/min | % | 5.0 | |
| Flexural Strength, 6.4mm | 30.0mm/min | ASTM D790 | kgf/cm2 | 1,400 |
| Flexural Modulus, 6.4mm | 30.0mm/min | ASTM D790 | kgf/cm2 | 74,000 |
| IZOD Impact Strength, 6.4mm | ASTM D256 | |||
| (Notched) | 23℃ | kgf·cm/cm | 8.5 | |
| -10℃ | kgf·cm/cm | - | ||
| Rockwell Hardness | R-Scale | ASTM D785 | - | - |
Thermal | ||||
| Heat Deflection Temperature, 6.4mm | ASTM D648 | |||
| (Unannealed) | 4.6kg | ℃ | 160 | |
| Note) Typical values are only for material selection purpose, and variation within normal tolerances are for various colors. | ||||
| Values given should not be interpreted as specification and not be used for part or tool design. | ||||
| All properties, except melt flow rate are measured on injection molulded specimens and after 48 hours storage at 23℃, 50% relative humidty. | ||||
| LUPOL LW4405 | |||
| Injection Molding, PP/GF/MF | |||
Description |
Application | ||
| General Purpose | Electrical & Electronic, Automotive Parts | ||
Processing Guide (Injection Molding) | |||
| Processing Parameters | Unit | Value | |
| Drying Temperature | ℃ | 70 ~ 80 | |
| Drying Time | hrs | 3 ~ 4 | |
| Maximum Moisture Content | % | 0.01 | |
| Melt Temperature | ℃ | 210 ~ 230 | |
| Rear | ℃ | 190 ~ 210 | |
| Cylinder Temperature | Middle | ℃ | 200 ~ 230 |
| Front | ℃ | 200 ~ 230 | |
| Nozzle Temperature | ℃ | 210 ~ 230 | |
| Mold Temperature | ℃ | 40 ~ 60 | |
| Back Pressure | kg/cm2 | 300 ~ 600 | |
| Screw Speed | rpm | 30 ~ 60 | |
| Note) Back Pressure & Screw Speed are only mentioned as general guidelines. | |||
| These may not apply or need adjustment in specific situations such as low shot sizes, thin wall molding and gas-assist molding. | |||
Description:
GENERAL PURPOSE
Applications:
ELECTRICAL & ELECTRONIC, AUTOMOTIVE PARTS
Specifications:
N.W. 25KGS PER BAG, 40 BAGS PER PALLET.
Competitive Advantage:
1. RELIABILITY OF QUALITY
2. STABILITY OF SUPPLY
2. SHORTER LEAD TIME
3. COST-EFFECTIVENESS
4. TECHNICAL SUPPORT (INCLUDING INJECTION MOLDING, VIRTUE CAE SERVICES, ETC.)
5.VALUE ADDED SERVICE(INCLUDING PLASTIC COLOR MATCHING)
6. CUSTOMIZATION SERVICE TO MEET CUSTOMER'S REQUIREMENT.
