EVER BEST(HK) LIMITED |
|
ABS XR404T Injection Molding Grade Plastic Raw Material with High
Heat Resistance ABS for Electric & Electronic Housing,
Automotive Exterior Housing(Rear Lamp Housing).
ABS Plastic Particles Quick Detail:
1. Injection Molding
2. High Heat Resistance
3. Widely Used
ABS XR404T Description:
1. Injection molding ABS grade
2. High Heat Resistance: This material reached 102℃ HDT in which it
is able to meet most of Automotive OEMs' requirements for interior
and exterior parts.
3. It is also widely used for E&E Products.
ABS XR404T Applications:
Electric & Electronic Housing, Automotive Interior and Exterior
Housing(Rear Lamp Housing).
ABS XR404T Datasheet:
Properties | Method | Unit | XR404T | |
Specific Gravity , 23℃ | ASTM D792 | 1.05 | ||
Mold Shrinkage , 23℃, 3.2mm , 23℃ | ASTM D955 | % | 0.4 ~ 0.7 | |
Melt Flow Rate , 220℃, 10kg | ASTM D1238 | g/10min | 6.5 | |
Tensile Strength at Yield , 23℃, 50mm/min, 3.2mm | ASTM D638 | Mpa | 53 | |
Tensile Elongation at Break , 23℃, 50mm/min, 3.2mm | ASTM D638 | %, (Min) | 15 | |
Tensile Modulus , 23℃, 50mm/min, 3.2mm | ASTM D638 | MPa | 2600 | |
Flexural Strength , 23℃, 15mm/min, 3.2mm | ASTM D790 | Mpa | 87 | |
Flexural Modulus , 23℃, 15mm/min, 3.2mm | ASTM D790 | MPa | 2750 | |
Izod Impact Strength , Notched, 3.2mm, 23℃ | ASTM D256 | J/m | 180 | |
Izod Impact Strength , Notched, 3.2mm, -30℃ | ASTM D256 | J/m | 70 | |
Izod Impact Strength , Notched, 6.4mm, 23℃ | ASTM D256 | J/m | 170 | |
Izod Impact Strength , Notched, 6.4mm, -30℃ | ASTM D256 | J/m | 60 | |
Rockwell Hardness , R-Scale | ASTM D785 | 111 | ||
HDT , Edgewise, 1.82MPa, 6.4mm, Unannealed | ASTM D648 | ℃ | 102 | |
VICAT , 50N, 50℃/h | ASTM D1525 | ℃ | 112 | |
Electrical |
|
|
| |
RTI Mechanical with Impact | UL 746B | ℃ | 60 | |
RTI Mechanical without Impact | UL 746B | ℃ | 60 | |
Flammability, 1.5mm | UL 94 | HB | ||
Flammability, 3.0mm | UL 94 | HB |
ABS XR404T Caution:
1. DO NOT EAT THE PELLETS AND AVOID INHALING DUST PARTICLES IN THE PACKAGING BAGS.
2. ENSURE THE PELLETS AND PACKAGING BAGS ARE DISPOSED OF PROPERLY AND IN COMPLIANCE WITH LOCAL/STATE REGULATION.
3.LIFTING OF HEAVY BAGS CAN CAUSE DAMAGE TO YOUR SPINE IF NOT DONE CORRECTLY.