Active Member
|
[China]
Address: Address:No. 666, Tongji New Industrial Park, Jimo District, Qingdao, Shandong, China
Contact name:zuo
Qingdao Jiexing Marine Equipment Co., Ltd. Qingdao Beierte Marine Technology Co., Ltd |
|
|
High Strength Natural Rubber Pneumatic Rubber Fender 80KPa
Pneumatic rubber fenders are divided into two types
1. The protection cover model
The sheath type yokohama fender is covered with a sheath consisting of a chain, or a nylon rope net, and old tires (or rubber sleeves). The longitudinal break point of the chain or nylon rope net is connected with one or two mesh holes of the adjacent mesh set with a cable or pull rope. The mesh set will be attached with a tire or rubber sleeve to provide protection for the fender body.
2. No sheath type
Fender without sheath type inflatable rubber fender is the fender without net tire chain coverage outside the surface. This kind of fender is light and easy to move, and makes the fender move more flexibly in the work, so as to deal with the impact from various angles.
Pneumatic rubber fender 50kPa common dimensions, performance
SIZE | Initial pressure is 50 kPa Compression deformation 60% | ||
| Diameter(mm) | Length (mm) | Reactionforce-kn | Energyabsorb kn-m |
| 500 | 1000 | 66 | 8 |
| 600 | 1000 | 76 | 10 |
| 700 | 1500 | 139 | 19 |
| 1000 | 1500 | 184 | 34 |
| 1000 | 2000 | 259 | 47 |
| 1200 | 2000 | 299 | 65 |
| 1350 | 2500 | 429 | 104 |
| 1500 | 3000 | 581 | 155 |
| 1700 | 3000 | 641 | 193 |
| 2000 | 3500 | 877 | 310 |
| 2000 | 4000 | 1010 | 531 |
| 2500 | 4000 | 1383 | 665 |
| 2500 | 5500 | 2021 | 945 |
| 3000 | 5000 | 2424 | 1359 |
| 3000 | 6000 | 2908 | 1630 |
| 3300 | 4500 | 1886 | 1177 |
| 3300 | 6000 | 2785 | 1677 |
| 3300 | 6500 | 3017 | 1816 |
Pneumatic rubber fender 80kPa common dimensions, performance
| SIZE | Initial pressure is 80 kPa Compression deformation 60% | ||
| Diameter(mm) | Length (mm) | Reactionforce-kn | Energyabsorb kn-m |
| 500 | 1000 | 87 | 9 |
| 600 | 1000 | 100 | 10 |
| 700 | 1500 | 182 | 28 |
| 1000 | 1500 | 241 | 40 |
| 1000 | 2000 | 340 | 54 |
| 1200 | 2000 | 392 | 69 |
| 1350 | 2500 | 563 | 100 |
| 1500 | 3000 | 763 | 174 |
| 1700 | 3000 | 842 | 192 |
| 2000 | 3500 | 1152 | 334 |
| 2000 | 4000 | 1591 | 386 |
| 2500 | 4000 | 1817 | 700 |
| 2500 | 5500 | 2655 | 882 |
| 3000 | 5000 | 2715 | 1080 |
| 3000 | 6000 | 3107 | 1311 |
| 3300 | 4500 | 2478 | 1642 |
| 3300 | 6000 | 3654 | 2340 |
| 3300 | 6500 | 3963 | 2534 |
Pneumatic rubber fender introduction:
Pneumatic rubber fender is a kind of ship supplies for berth cushion and protection. Yokohama pneumatic fender is more practical and economical than general ship fender, so it is very popular.
The inflatable rubber fender is a rubber airtight container made of gluon cloth as skeleton material. The fender is filled with compressed air and can float on the water. It serves as an important buffer medium between ship and ship berthing and between ship and wharf. At the same time, inflatable rubber fender can absorb the impact energy of ship movement, reduce the ship's recoil force, and greatly improve the safety of ship docking.
With air as the medium, the compressed air is used to absorb the impact energy, so that the ship is flexible when docking, so as to achieve the effect of collision prevention and avoidance. Yokohama fender has been widely used in oil tankers, container ships, engineering ships, ocean-going fishing boats, offshore platforms, large docks, military ports, large bridge piers and other ships and offshore platforms.
Schematic diagram of pneumatic rubber fender:
Pneumatic rubber fender pressure test
Display of pneumatic rubber fender products
