|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
4V310-08 1/4 Inch 5/2 Way Single Coil Pilot Pneumatic Solenoid Valve
The 5/2 valve will have two actuator ports connected to the air
actuator ports. When compressed air is supplied to the 5/2 valve,
it will pass through the valve. However, air will flow to only one
of the two actuator ports. The other actuator port will then open
the exhaust, allowing air to escape from the side of the air
actuator piston, as the compressed air supply will flow into the
other actuator port.
As the 5/2 valve operates, the slide or lift spool in the valve
moves. The compressed air is then directed to another actuator
port. The previously charged line is then directed to the
atmosphere, making it an exhaust line from the actuator to the
atmosphere.
As the valve moves, the actuator rod is alternately extended or
retracted. Hence, the term "double action".
The original position of the actuator (whether the rod is stretched
out or retracted, or, if the actuator is rotated, in one direction
or another) will depend on the requirements of the air loop. Valve
5/2 is plumbed to ensure that air is supplied to the appropriate
actuator port to achieve the desired lever position when the air
valve is stationary.
Technical Data:
Model | 4V310-08 4V320-08 | 4V330C-08 4V330E-08 4V330P-08 | 4V310-10 4V320-10 | 4V330C-10 4V330E-10 4V330P-10 |
Fluid | Air(to be filtered by 40 μ m filter element) | |||
Acting | Internal pilot or external pilot | |||
Port Size | In=Out=Exhaust=1/4'' | In=Out=3/8'' Exhaust=1/4'' | ||
Orifice Size | 25.00 mm2 (Cv=1.40) | 18.00 mm2 (Cv=1.00) | 30.00 mm2 (Cv=1.68) | 18.00 mm2 (Cv=1.00) |
Valve Type | 5 port 2 position | 5 port 3 position | 5 port 2 position | 5 port 3 position |
Operating Pressure | 0.15~0.8MPa(21~114psi) | |||
Proof Pressure | 1.5MPa(215psi) | |||
Temperature ℃ | -20~70 | |||
Material of Body | Aluminum alloy | |||
Max. frequency | 4 cycle/sec | 4 cycle/sec | 4 cycle/sec | 4 cycle/sec |
Dimension Diagram:
4V310(Grommet)
4V310(Terminal)
Product Features:
1. High-strength aluminum alloy botton cover
2. One-time machining of valve lever by CNC, high precision
3. Valve body was machining by CNC, clean and beautifull
4. spacial processing of inner hole, small friction resistance and
low starting pressure
5. High-precision pilot accessories, excitation time of only 0.05
seconds
6. imported seals, the life up to 10 millions of times
7. Aluminum alloy piston is not easy to damage
8. Embedded copper nut not easy to loose
9. with a manual device for installaton and testing
10. Copper coil has avariety of voltage available for selection
Brando Supply:
1.Solenoid Valve:
Pulse Jet Valve: Goyen Type Pulse Jet Valve, SBFEC Type Pulse Jet
Valve, ASCO Type Pulse Jet Valve , Turbo Type Pulse Jet Valve.
Direct Acting Solenoid Valve:Brass Solenoid Valve, Stainless Steel
Solenoid Valve, Plastic Solenoid Valve and etc.
Refrigeration Solenoid Valve:Castel Type Solenoid Valve, Danfoss
Type Solenoid Valve.
2.Repair Kit:Solenoid Coil, Solenoid Armature/Stem, Diaphragm Repair Kit and etc.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
