Ningbo Brando Hardware Co., Ltd |
Verified Suppliers
|
|
CA89MM 3-1/2 Inch Manifold Flat Mount Submerged Pulse Jet Valve
Youtube Video About CA89MM Double Diaphragm Solenoid Pulse Valve:
Technical of CA89MM 3 Inch Dust Collector Electromagnetic Valve:
Model No. | CA89MM |
Port Size | G3'' |
Number of Diaphragm | 2 |
Working Media | Air |
Working Pressure | 0.3~0.8Mpa |
Working Temperture | -5~+55℃ |
Seal Material | NBR(common, all available) |
Body Material | Aluminum Alloy (diecast) |
Voltage | AC220V, AC110V, AC24V, DC24V |
Special voltages and special specifications, please contant us. |
Main Dimension of Reverse Pulse Jet Valve:
Details About CA89MM Diaphragm Valve AC220V AC110V AC24V DC24V:
The factors that affect the length of the bag filter bag of an
industrial dust collector are:
1. The number of filter bags is reduced, and the equipment area is
small: Under the condition of the same processing air volume,
filter wind speed and bag diameter, the increase in the length of
the dust bag will increase the filter area of a single bag,
thereby reducing the number of filter bags and reducing the area
area;
2. The number of bags is reduced, so the solenoid valve, pulse
valve, blowing pipe and other parts of the dust removal system will
also be reduced, saving investment and shortening the dust removal
cycle of the dust collector.
3. Excessive length of the filter bag will increase the
manufacturing cost: the height of the industrial dust collector box
will increase, and the upward extension will increase the strength
of the component, so the equipment manufacturing cost will
increase.
4. Poor dust removal effect: when the industrial dust collector bag
is used for online dust removal, the longer the filter bag, the
greater the possibility that the dust sprayed out of the bag will
be re-absorbed and will be absorbed into the bag; if the dust is
removed offline, the longer the bag will be The suspension time
should also be prolonged, and the slower the recovery and
filtration of the cleaning chamber;
5. The bag is easy to damage: the longer the dust bag, in order to
ensure an effective dust removal effect, the stronger the blowing
energy needs to be maintained, the greater the blowing potential
energy, the more likely the dust bag is to be damaged;
6. If the filter bag is too long, installation, maintenance and
inspection will be inconvenient.
Construction:
Body and Dreeser Nuts: Aluminum (diecast)
Ferrule: 305 Stainless Steel
Armature: 430FR Stainless Steel
Diaphragm and Seals: Nitrile or FKM
Spring: 304 Stainless Steel
Screws: 302 or 304 Stainless steel
Outlet Pipe: Schedule 40 wrought steel zinc passivated
Diaphragm Seat: PA-66 (25 & 40MM standard), Nitrile-coated mild
steel (76MM standard), Acetal (102MM standard) or FKM coated mild
steel
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!