Ningbo Brando Hardware Co., Ltd |
Verified Suppliers
|
|
AC220V DC24V 1/4'' Inch 6013 NC Direct Acting Plunger Solenoid Valve
Features of 6013 Brass Solenoid Valve:
1.Type 6013 is a general-purpose valve used for shut-off, filling,
dosing and ventilation.
2.The compact valve is suitable for small flow rates, the nominal
diameter lies between 2 and 6 mm.
3.The maximum pressure varies from 0.75 up to 25 bars, depending on
the orifice size and coil. Because of the direct acting design, the
valve can be used in systems without a pressure differential, such
as a closed circulating circuit or gravity fed system. It can even
be used for technical vacuum.
4.The bolted-coil design is designed to withstand strong
vibrations. Housing materials are brass or stainless steel (grade
303).
5.The valve is available with an inline design with port sizes from
G1/8” up to G3/8” or a subbase design suitable for manifold
mounting (SFB).
6. The system is simple, just connect to the computer, and the price is low
7.The adjustment accuracy is limited
8.Express action, small power, light appearance
9.Diverse models, wide range of applications, limited media
10.External leakage is blocked, internal leakage is easy to control, safe to use
Main Dimension of 6013 Solenoid Valve:
Technical Data of 6013 Solenoid Valve:
Model | Orifice Size (mm) | Port Size | Working Pressure (MPa) | KV (m³/h) | Environment Temperature | Medium Temperature | Power |
6013-01 | 1.5 | 1/8'' or 1/4'' | 0 to 2.5 | 0.1 | -10 to +55℃ | NBR: -5 to +80℃ EPDM: -5 to +120℃ VITON: -10 to +150℃ | AC: 24VA (inrush) 17VA (hold) , DC: 13W |
6013-02 | 2.0 | 0 to 1.5 | 0.15 | ||||
6013-03 | 3.0 | 0 to 1.0 | 0.31 | ||||
6013-04 | 4.0 | 0 to 0.4 | 0.54 |
Valve 6013 is a direct-acting plunger valve, that operates without
a differential pressure over the valve. The stopper and plunger
guide tube are welded together to enhance pressure resistance and
leak-tightness. It can be used for low pressure applications, but
also has versions that operate up to 25 bars. Various seal material
combinations are available depending on the application. The coils
are moulded with polyamide or with chemically resistant epoxy. In
combination with a plug in accordance with DIN EN 175301-803 Form
A, the valves satisfy protection class IP65.
1. Direct-acting and compact valve up to diameter of DN 6.0
2. Vibration-proof, bolted coil system
3. Increased leak-tightness with welded plunger guide tube
4. Energy-saving pulse versions
Brando Factory Production of Brass Solenoid Valves:
As a solenoid valve supplier, BRANDO supplys general purpose solenoid valve for general mediums control. Such as water, air, gas, oil. Offering the cost-effective solution for your projects. Available in brass, stainless steel and PVC material for your projects.
● Size Range: 1/4" to 2" (1/4", 3/8", 1/2", 3/4", 1", 1-1/4",
1-1/2", 2", 2-1/2", 3", 4")
● Voltage: 12 Volt DC, 24 Volt DC, 24 Volt AC, 110 Volt AC, 220
Volt AC
● Pressure: 0-10 bar / 0.3-16 bar
● Temperature: -10℃~180℃
● Material: Brass, Stainless Steel and PVC
● Structure: Direct Acting / Diaphragm / Pilot Operated
● Function: Normally Closed / Normally Open
● Connection Type: Threaded, Flanged, Tri Clamp
● Tolerance: ±10%
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!