|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
4V330C-10 3/8'' Double Solenoid 5/3 Way Close Center Pneumatic Solenoid Valve
AirTAC Type 4V330C-10 pneumatic solenoid valve is a 5/3 pneumatic valve with five ports, three positions and two solenoid coils. It is electrically controlled and is usually used to control a cylinder.
The 4V300 series has the following three types:
4V310-10 is a 5/2 pneumatic valve with 1 solenoid coil;
4V320-10 is a 5/2 pneumatic valve with 2 solenoid coils;
4V330-10 is a 5/3 pneumatic valve with 2 solenoid coils.
Installation instructions of 5/3-way pneumatic solenoid valve:
1. Before installation, please ensure that the valve is not damaged
due to transportation.
2. It is recommended to use a medium lubricated by a 40 m filter
element. Note flow direction and port size.
3. Please pay attention to whether the installation conditions meet
the technical requirements (such as "voltage", "starting
frequency", "working pressure" and "operating temperature range")
before installing and using the equipment.
4. Pay attention to the direction of air flow during installation.
P is the inlet, A (B) is the working outlet and R (S) is the
exhaust outlet.
5. Take steps to avoid vibration and freezing.
6. Make sure the fittings and pipes are clean before using them.
When connecting to fittings, make sure that the PTFE thread sealing
tape is used correctly.
7. To prevent dust from entering, use a muffler at the exhaust.
When disassembling, do not forget to install dust cover at inlet
and outlet.
8. After installation, please test the valve by manually operating
the valve first.
Technical Data:
Model | 4V310-08 4V320-08 | 4V330C-08 4V330E-08 4V330P-08 | 4V310-10 4V320-10 | 4V330C-10 4V330E-10 4V330P-10 |
Fluid | Air(to be filtered by 40 μ m filter element) | |||
Acting | Internal pilot or external pilot | |||
Port Size | In=Out=Exhaust=1/4'' | In=Out=3/8'' Exhaust=1/4'' | ||
Orifice Size | 25.00 mm2 (Cv=1.40) | 18.00 mm2 (Cv=1.00) | 30.00 mm2 (Cv=1.68) | 18.00 mm2 (Cv=1.00) |
Valve Type | 5 port 2 position | 5 port 3 position | 5 port 2 position | 5 port 3 position |
Operating Pressure | 0.15~0.8MPa(21~114psi) | |||
Proof Pressure | 1.5MPa(215psi) | |||
Temperature ℃ | -20~70 | |||
Material of Body | Aluminum alloy | |||
Max. frequency | 4 cycle/sec | 4 cycle/sec | 4 cycle/sec | 4 cycle/sec |
Dimension Diagram:
4V320(Grommet)
4V320(Terminal)
Brando Supply:
1.Solenoid Valve:
Pulse Jet Valve: Goyen Type Pulse Jet Valve, SBFEC Type Pulse Jet
Valve, ASCO Type Pulse Jet Valve , Turbo Type Pulse Jet Valve.
Direct Acting Solenoid Valve:Brass Solenoid Valve, Stainless Steel
Solenoid Valve, Plastic Solenoid Valve and etc.
Refrigeration Solenoid Valve:Castel Type Solenoid Valve, Danfoss
Type Solenoid Valve.
2.Repair Kit:Solenoid Coil, Solenoid Armature/Stem, Diaphragm Repair Kit and etc.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
