|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
Henny Penny 18721 Solenoid Valve Coil MP-C-011 220V 50Hz 240V 60Hz
A solenoid valve coil is designed to convert electrical energy into lateral motion. The coil usually consists of copper wire wound around a hollow bobine or tube so when electric current flows through the coil, a magnetic field is generated. By placing a solenoid valve coil over a ferromagnetic core (usually magnetic 430F stainless steel armature) the magnetic field generated causes the plunger to slide further up towards the magnetic field (into the coil) thus allowing an opening to be created. This in turn can be utilised to either to control direct acting solenoid valves, Assisted Lift Solenoid Valves or Servo/ Pressure Assisted solenoid valves.
Solenoid valve coils come in a huge range of sizes, voltages, IP protection levels, temperature ratings and power levels. Care needs to be taken when replacing solenoid valve coils because all these factors must be considered.
Dimension & Data of MP-C-011 Solenoid Coil:
Model | MP-C-011 |
Connection Type | Flying Leads |
Voltage | 24VAC, 110VAC, 120VAC, 220VAC, 240VAC (50/60Hz) |
Insulation Class | H, F |
Temperature Class | T, B |
Model | BAPC216049003 |
Function | 2/2 Way, Normally Closed |
Tube Material | Stainless Steel |
Shading Ring Material | Copper |
Seat Type | Thread |
Fitted Coil | MP-C-011 |
Application Example | Henny Penny Fryer |
Multi-angle display of MP-C-011 solenoid coil:
MP-C-011 Coil surface parameter laser marking display:
Brando Factory Production Video of Solenoid Coils:
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
