|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
1028/2 ODF Solder Air Conditionor Refrigeration Solenoid Valve
Technical Data:
Model | Connection | Dimension | Coil Type | |||
SAE (Flare), ODF (Solder) | H1 | H2 | L1 | Q | HM2 HM3 | |
1020/2 | 1/4'' SAE | 75 | 62.5 | 58 | - | |
1020/3 | 3/8'' SAE | 65 | ||||
1028/2 | 1/4'' ODF | 32.5 | 125 | |||
1028/3 | 3/8'' ODF | 62.5 | 125 | |||
1064/3 | 3/8'' SAE | 82 | 69.5 | 68 | ||
1064/4 | 1/2'' SAE | 72 | ||||
1068/3 | 3/8'' ODF | 111 | ||||
1068/4 | 1/2'' ODF | 127 | ||||
1070/4 | 1/2'' ODF | 91 | 75.0 | 100 | 45 | |
1070/5 | 5/8'' ODF | 106 | ||||
1078/4 | 1/2'' ODF | 127 | ||||
1078/5 | 5/8'' ODF | 173 | ||||
1078/9 | 1 1/8'' ODF | 115 | 96.0 | 250 | 80 | |
1078/11 | 1 3/8'' ODF | 172 | 138.0 | 278 | 68 | |
1090/5 | 5/8'' SAE | 106 | 78.0 | 120 | 57 | |
1090/6 | 3/4'' SAE | 106 | 78.0 | 124 | 57 | |
1079/7 | 7/8'' ODF | 91 | 75.0 | 190 | 45 | |
1079/11 | 1 3/8'' ODF | 115 | 96.0 | 292 | 80 | |
1079/13 | 1 5/8'' ODF | 172 | 138.0 | 278 | 68 | |
1098/7 | 7/8'' ODF | 106 | 78.0 | 180 | 57 | |
1099/9 | 1 1/8'' ODF | 106 | 78.0 | 216 | 57 | |
1099/11 | 1 3/8'' ODF | 157 | 127.0 | 291 | 68 | |
Dimension:
Replacement Castel Type Solenoid Coil:
Installation:
All the valves in this chapter can be installed on the three main
branches of a plant (hot gas line, liquid line, and suction line),
while respecting the limits of use and the capacities, the
following functional characteristics of a solenoid valve:
1. Connection dimensions
2. PS: maximum allowable pressure of the refrigerant
3. TS: maximum / minimum allowable temperature of the refrigerant
4. TA: maximum / minimum allowable ambient temperature
5. Kv: discharge factor
6. minOPD: minimum Opening Pressure Differential. This is the
minimum pressure differential between inlet and outlet at which a
pilot-operated solenoid valve can open and stay opened or close and
maintain the seal.
7. MOPD: maximum opening pressure differential according to AHRI
STANDARD 760:2014. This is the maximum pressure differential
between inlet and outlet at which a solenoid valve can open.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
