|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
SV NPT 1/4'' Inch Threaded Water Purifier RO Solenoid Valve
BPV02-T Direct Acting Threaded Type is a high quality and widely used reverse osmosis Filter , used worldwide in reverse osmosis systems for domestic , commercial , water fed pole , aquarium and all other RO's due to its strength of filtering , durability and reliability.
Made of high quality material, safe, hygiene and durable, serve you for a long time.Unique buckle design of the interface makes the takeover more firm and not loose.
The high quality coil improves the accuracy of the switch, the
electromagnetic is more stable, while the ceramic-like material is
resistant to high temperature, water, anti-aging and durable.
1/4 quick-connect interface, completes the connection
immediately.The water flow direction of the solenoid valve prevent
incorrect installation.
Technical data:
| Characteristic | 1)Direct acting,0 rated bar pressure.low power 2)compact design to save the space |
| Medium | Air,water,steam,oil,etc. |
| Temperature | NBR: -10°C to 80 °C EPDM: -10°C to 120 °C FKM:-10°C to 150 °C |
| Pressure | 0-1.6Mpa |
| Port Size | 1/4'' |
| Port Thread | G, NPT |
| Orifice | 2.5mm |
| Voltage | DC-12V,24V AC-24V,120V,110V,220V/50HZ |
| Voltage Range | ±10% |
| Material | Body-Nylon,PP,POM Amature tube-stainless steel 304 Plunger-stainless steel430F Stop-stainless steel 430F Springs-SS304 Shading rings- stainless steel 304 |
Main Dimension of RO Solenoid Water Valve:
Brando Factory Production of Solenoid Valves:
More Plastic Reverse Osmosis Solenoid Valve(RO SV):
Reverse Osmosis systems
A simple reverse osmosis system consists of a high-pressure pump which increases the pressure of the feed water with salts, ions or impurities. This forces the water across the semi permeable RO (Reverse Osmosis) membrane, leaving behind all the dissolved salts. The required pressure is directly proportional to the salt concentration of the inlet water. The higher the concentration, the higher pressure is required to overcome the osmotic pressure.
The RO membrane lets the cleaner water through and this is called permeate water. The salts and other contaminants which are stopped by the membrane come out as a reject stream. This can be drained out or recycled if possible through the RO system to save water.
The RO systems remove up to 99% of dissolved salts (ions), particles, pathogens and bacteria from feed water.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
