Ningbo Brando Hardware Co., Ltd |
Verified Suppliers
|
|
AirTAC Type 5/2 Way 1/8'' Single Solenoid Pneumatic Valve 24VDC 220VAC 4V110-06
This solenoid air valve is a functional replacement for the Airtac 4V100 series & SMC VFS1000 series. 4V110-06 has 1/8″ Inlet, Outlet and Exhaust Port. Five Way Two Positions (5/2 way) Solenoid Valve, Normally Closed with Spring Return. Options such as lead wire connection, sub-plate mounting, metric port etc, are all available.
4V Series Solenoid Valve Features:
1. Pilot-oriented mode: optional for internal or external;
2. Structure in sliding column mode: good tightness and sensitive
reaction;
3. Internal hole adopts special processing technology which has
little attrition friction, low start pressure and long service
life;
4. It is available to form integrated valve group with the base to
save installation space;
5. Affiliated manual devices are equipped to facilitate
installation and debugging;
6. Several standard voltage grades are optional;
Dimension of 4V110-06 Pneumatic Solenoid Valve:
Specifications of 4V Series Internal Pilot Operated Pneumatic Valve:
Details:
Installation Instructions:
1. Before installing, be sure the valve hasn’t been damaged via
transportation.
2. It’s suggested to use the medium lubricated by 40μm filter
element. Be aware of the flow direction and port size.
3. Please notice whether the installation condition accords with
technical requirements (such as “voltage”, “actuation frequency”,
“working pressure” and “scope of application temperature”), then
the equipment can be installed and used.
4. Notice the flow direction of air during installation, P is the
air intake, A (B) is the work port and R (S) is the exhaust outlet.
5. Take measure to avoid vibration and frozen.
6. Before using the fittings and tubes make sure they are clean.
When connecting to fittings, be sure the PTFE Thread Seal Tape is
used correctly.
7. To keep the dust away, please use the silencer for the exhaust
ports. Never forget to install dirt-proof boot in air intake and
outlet during dismounting.
8. After installing, please use the manual override to test valve
first.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!