|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
3/4'' CKD Type Normally Closed Solenoid Valve Stainless Steel Solenoid Valve ADK11-20
Power:Solenoid
Media:Air, Water, Oil, Gas
Port Size:3/4''
Function:2/2 Way, Normally Closed / Normally Open
Operation:Direct Acting
Body Material:Stainless Steel
Seal Material:NBR, EPDM, FKM, Si
Medium Temperature:-10 to +60℃
Electrical Connector:DIN 43650 Connector, Wire Leads
Voltages:12V DC, 24V DC, 24V DC, 110V AC, 220V AC
Orifice Size (mm):1.5, 2, 3, 3.5, 4, 5, 7, 10
Dimension of CKD Type ADK11 Series Solenoid Valve:
| Model No. | A | B | C | D | E | F | G |
| ADK11-15A-02C | 71 | 27(29) | 14.5 | 75.5 | 102 | 50 | Rc1/2 |
| ADK11-20A-02C | 80 | 32(35) | 17.5 | 79 | 108.5 | 60 | Rc3/4 |
| ADK11-25A-02C | 90 | 41(45) | 21.5(22.5) | 84.5 | 118(119) | 71 | Rc1 |
Technical Data:
| Descriptions | Standard Specifications | Optional Specifications |
| Working Fluid | Air/low vacuum (1.33 x 103 Pa (abs))/water/kerosene/oil (50mm2 /s or less) | Hot Water |
| Working pressure differential MPa | 0 to 1.0 (refer to max. working pressure differential in individual specifications.) | |
| Max. working pressure MPa | 2 (≈290 psi, 20 bar) | |
| Proof pressure (water pressure) MPa | 4 (≈580 psi, 40 bar) | |
| Fluid temperature (*1) °C | -10 (14°F) to 60 (140°F) | -10 (14°F) to 90 (194°F) |
| Ambient temperature °C | -10 (14°F) to 60 (140°F) | |
| Thermal class | Class 130 (B) | Class 180 (H) |
| Atmosphere | Place free of corrosive gas and explosive gas | |
| Valve structure | Pilot kick poppet, diaphragm drive | |
| Valve seat leakage (*2) cm3 /min(ANR) | 1 or less (air) | |
| Mounting orientation | Unrestricted | |
| Body/seal material | Bronze/nitrile rubber | Bronze/ethylene propylene rubber |
Brando Factory Production of Solenoid Valves:
Product Features:
1. ADK11 series is direct, multiplex, connected diaphragm,
conductive and normally closed (NC) 2/2 way solenoid valve;
2. Able to be operated directly under low pressure;
3. Availability of fluid type:water, air, light oil;
4. Diaphragm accept for customization NBR, FKM, Silicone and EPDM.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any problem and inquiry!
