Ningbo Brando Hardware Co., Ltd |
Verified Suppliers
|
|
1'' SBFEC Type Baghouse Pulse Jet Valve Diaphragm Repair Kit
Working Principle:
Pulse valve parts including armature assembly, solenoid coil,
diaphragm and valve body. The diaphragm keep close because of air
pressure balance. Pulse timer send input signals so that the the
coil make armature attracted and moving. Balance lost and balancing
hole to release the pressure air in the back cavity of diaphragm
quickly; the pressure air in the front cavity holds up the
diaphragm to open the passage and the valve start one time jet.
When the pulse signal disappears and the spring push the armature
works immediately to resume the position, balancing hole been
closed. Balance resumed in both cavity, so the valve stop jet.
Available Models of BFEC DMF/MF Series Diaphragm Repair Kit:
Ordering Code | Fitted Valve Code | Port Size |
DTY | MF/DMF-T-25S, MF/DMF-T-40S, MF/DMF-T-50S, MF/DMF-T-62S, MF/DMF-ZM-40S, MF/DMF-Y-40S, MF/DMF-Y-50S, MF/DMF-Y-62S, MF/DMF-Y-76S, MF/DMF-YA-76S, MF/DMF-YB-76S, MF/DMF-Y-102S, MF/DMF-Y-102SA, MF/DMF-Y-102SE, MF/DMF-ZF-40S, MF/DMF-Z-40S, MF/DMF-Z-50S, MF/DMF-Z-62S, MF/DMF-Z-76S, MF/DMF-Z-102S | Secondary Diaphragm |
D20A | DMF-Z-20, MF-Z-20, DMF-ZM-20, MF-ZM-20 | 3/4'' |
D25 | DMF-Z-25, MF-Z-25, DMF-ZM-25, MF-ZM-25, DMF-ZF-25, MF-ZF-25, DMF-Y-25, MF-Y-25, DMF-T-20, MF-T-20 | 3/4'' & 1'' |
D40 | DMF-Z-40S, MF-Z-40S, DMF-Y-40S, MF-Y-40S, DMF-ZF-40S, MF-ZF-40S, DMF-ZM-40S, MF-ZM-40S, DMF-T-25S, MF-T-25S | 1'' & 1-1/2'' |
D50 | DMF-Z-50S, MF-Z-50S, DMF-Y-50S, MF-Y-50S, DMF-T-50S, MF-T-50S | 2'' |
D62 | DMF-Z-62S, MF-Z-62S, DMF-Y-62S, MF-Y-62S | 2-1/2'' |
D76 | DMF-Z-76S, MF-Z-76S, DMF-Y-76S, MF-Y-76S | 3'' |
D102 | DMF-Z-102S, MF-Z-102S, DMF-Y-102S, MF-Y-102S | 4'' |
D102A | DMF-Y-102SA, MF-Y-102SA | 4'' |
DZL-20B | DMF-ZL-B, MF-ZL-B | 3/4'' |
Dimension Diagram:
Diaphragm Features:
1. Diaphragm (Rubber or Fabric Reinforcement in Rubber Diaphragms)
is a precision functional part used check pressure or change fluid
pressure into drive power.
2. Fabric-reinforced in rubber diaphragms utilize a layer of an
engineered fabric material as part of the diaphragm comstruction.
This layer of fabric give tremendous design flexibity.
3. Fabric is made of polyester, nylon and silk and commonly used
for most applications, such like exposed to high-temperature, or
require extremely high-strength.
4. Facbric-reinforced diaphragms advantages:
*No leakage
*No Lubrication
* No Breakaway Force
* No Friction
* Functionality Over Wide Pressure Ranges
* High Strength
* Low Cost
* Simple Design
* Versatility
5. EPDM, FKM all available.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!