|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
K0304 48V DC CY123 N282 C53056N Solenoid Valve Coil For Goyen Type CA Series Pulse Valve
Possible problems and solutions of Solenoid Coil:
1.Overvoltage.
voltage must conform to rating.
2.Excessive ambient or fluid temperature.
For temps up to 167 F, use Class F coils; for temps up to 212 F, use Class H.
3.Moisture inside solenoid enclosure.
Waterproof the entrance conduit to prevent entry of moisture. If valve is mounted outdoors, check to see that enclosure is weatherproof and that gaskets are in good condition; use appropriate sealant when required. If general-purpose enclosure is used in a damp or humid atmosphere, use watertight, molded coils.
We also have 200/240v 220V AC 50/60Hz(K0300), 100/120V 110V AC
50/60Hz(K0301), 24V AC 50/60Hz(K0302), 110V DC (K0303),
48VDC(K0304), 24V DC(K0305), 12VDC (K0306).
Hole Size: 12mm
Height: 41mm
Width: 37.5mm
Voltage: 48V DC
Power: 20Watt
Connector: DIN43650A
Insulation Class: F.H
Protection Class: IP64
Application: Goyen Type Dust Collector Pulse Valve
Dimension of K0302 24V AC Dust Collector Valve Coil:
Solenoid Pulse Valve Coil Technical Data:
| Model No. | BB12039508 |
| Normal voltage | 48V DC |
| Normal power | AC:25VA DC20W |
| Insulation class | H, F |
| Connection type | DIN43650A |
| Application | Goyen type pulse solenoid valve |
| Weight | 142.5 g |
Code | Type | Class | Voltage | Inrush (mA) | Hold (mA) | Power |
K0300 | QR | IP64 | 200/240V 220V AC 50/60Hz | 1338/1096 | 963/716 | 23.1VA |
K0301 | QR | IP64 | 100/120V 110V AC 50/60Hz | 234/225 | 180/152 | 19.8VA |
K0302 | QR | IP64 | 24V AC 50/60Hz | 1338/1096 | 963/716 | 23.1VA |
K0303 | QR | IP64 | 110V DC | 212 | 212 | 24W |
K0304 | QR | IP64 | 48V DC | 429 | 429 | 20W |
K0305 | QR | IP64 | 24V DC | 873 | 873 | 20W |
K0306 | QR | IP64 | 12V DC | 1644 | 1644 | 20W |
Application Example:
Product Characteristic:
1. Using high quality wire which has UL approved;
2. Using high quality permeablity magnetic material which contain
low carbon;
3. Using high quality housing material like PA66, PBT, PPS, BMC and
so on.
4. Insulation class can be B, F, H, N, C;
5. Protection class can be IP65, IP67 & IP69K;
6. We also offer special coils like ex-proof coils, water proof
coils and so on.
7. If you have special requirement, pls feel free to contact us.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
