|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
AC 220V DC 24VG 2'' Inch DN50 2/2 Way Direct Operated UW-50 2W500-50 Brass Solenoid Water Valve
Description:
2 Inch Water DC24V Solenoid Valve. It's two way two position direct
acting diaphragm electric solenoid valve with available voltage
AC220V, AV110V, DC24V and DC12V. It can be used for liquid , air,
water, gas in a variety of different applications. This valve uses
NBR or Viton seal material that is compatible with many liquid such
as water up to 80°C. The valve is normally closed, closed when
de-energized and open when energized. It is capable of operating at
zero differential pressure. This compact solenoid features with
female BSP thread or NPT thread.
2 Inch Water DC24V Solenoid Valve has four coil with voltage
AC220V, AV110V, DC24V and DC12V. The coil head is fitted with a DIN
connection that can easily be connected with your own choice of
terminals. This model is mountable in any position and features a
conveniently positioned arrow on the body to indicate the direction
of flow. Its response time is very low; in fact, it acts in less
than one second, making it a great choice for all types of
applications.
Non-applicable fluid
When the temperature is high, it is liquid, and solid when cooled;
Corrsive Fluid; Fluid above 20 cst concentration.
Attention
The impurities in the line must be cleaned first before
installation. In order to prolong service life, Y filter should be
installed on the front end of solenoid valve.
Feature:
1.Pilot diaphragm drive, normally closed.
2.Valve body material is brass.
3.Can be operated directly without pressure.
4.Standard voltage : 24VDC,110VAC, 220VAC AC Voltage tolerance: ±
10% ,
DC Voltage tolerance:±1%.
5.Other special AC/DC can be made to client's order.
6.Thread: BSPT, NPT , BSP.
7.The standard product fluid temperature is 80°C(NBR).
8.Temperature:Viton(130°C), Silicon(130°C), PTFE(185°C).
9.DIN43650A connector Coil is interchangeable
Specification:
Model 2W160-10 2W160-15 2W200-20 2W250-25 2W350-35 2W400-40
2W500-50
Working Medium Air, Water, Oil, Gas
Motion Pattern Direct Drive Type
Type Normal Close Type
Aperture of Flow Rate mm 16 20 25 35 40 50
CV Value 4.8 7.6 12 24 29 48
Joint Pipe Bore 3/8" 1/2" 3/4" 1"11/4" 11/2" 2"
Operation Fluid Viscosity 20CSTBelow
Working pressure Air: 0~1.0Mpa Water: 0~0.7Mpa Oil: 0~0.7Mpa
Max. Pressure Resistance 1.0Mpa
Operating Temperature -5~80 degree
Voltage Range: 10%
Material of Body Brass
Material of Oil Seal NBR or VITON
| Reference No | UW-10 | UW-15 | UW-20 | UW-25 | UW-35 | UW-40 | UW-50 | |
| Ordering No | 2W160-10 | 2W160-15 | 2W200-20 | 2W250-25 | 2W350-35 | 2W400-40 | 2W500-50 | |
| Pipe size(Inch) | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 | |
| CV | 4.5 | 4.5 | 8.6 | 12 | 24 | 28 | 48 | |
| Orifice | 15mm | 15mm | 20mm | 25mm | 35mm | 40mm | 50mm | |
| Fluid temp(℃) | -5~+80 | -5~+80 | -5~+80 | -5~+80 | -5~+80 | -5~+80 | -5~+80 | |
| Operating pressure kgf/cm2 (bar) | Water | 0~5 | 0~5 | 0~5 | 0~5 | 0~5 | 0~5 | 0~5 |
| Air | 0~7 | 0~7 | 0~7 | 0~7 | 0~7 | 0~7 | 0~7 | |
| Oil | 0~5 | 0~5 | 0~5 | 0~5 | 0~5 | 0~5 | 0~5 | |
| High Pressure type | Water | 0.5~10 | 0.5~10 | 0.5~10 | 0.5~10 | 0.5~10 | 0.5~10 | 0.5~10 |
| Air | 0.5~20 | 0.5~20 | 0.5~20 | 0.5~20 | 0.5~20 | 0.5~20 | 0.5~20 | |
Dimension Diagram:
Water Valve Detail:
Tips: All accessories can be sold separately as repair parts (Diaphragm, Solenoid Coil, Armature Assembly)
Youtube video of water solenoid valve
Selection basis:
First,Select the diameter specification (ie DN) and interface mode of the solenoid valve according to the pipeline parameters.
1.Determine the diameter (DN) size according to the inner diameter of the pipeline or the flow requirement.
2.interface mode, general > DN50 to choose the flange interface, ≤ DN50 can be freely selected according to user needs.
Second,Select the material and temperature group of the solenoid valve according to the fluid parameters
1.corrosive fluid: should choose corrosion-resistant solenoid valve and all stainless steel; edible ultra-clean fluid: food grade stainless steel solenoid valve should be used.
2.high temperature fluid: to choose the use of high temperature resistant electrical materials and sealing materials made of solenoid valves, and to choose the type of piston structure.
3.the fluid state: large to have a gaseous state, liquid or mixed state, especially when the caliber is larger than DN25 when ordering must be distinguished.
4.fluid viscosity: usually below 20cSt can be arbitrarily selected, if the viscosity is high, you should use high viscosity solenoid valve.
Third,Select the principle and structure of the solenoid valve according to the pressure parameters
1.Nominal pressure: This parameter has the same meaning as other general-purpose valves and is determined according to the nominal pressure of the pipeline.
2.Working pressure: If the working pressure is low, the direct-acting or step-by-step direct-acting principle must be used; when the minimum working pressure difference is above 0.04Mpa, direct-acting, step-by-step direct-acting or pilot-operated can be used.
Fouth,Voltage selection: The voltage specification should be as convenient as possible for AC220V and DC24.
Fifth,Select auxiliary functions according to environmental requirements: explosion-proof, waterproof fog, water shower, diving.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
