|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
AC220V DC24V 1/4'' PT Airtac Type Pneumatic Solenoid Valve 4V210-08 Pilot Operated 5/2 Way
Product Features of 1/4'' PT Airtac Type Pneumatic Solenoid Valve 4V210-08 Pilot Operated 5/2 Way:
1. Structure in sliding column mode: good tightness and sensitive
reaction;
2.Three position solenoid valves have three kinds of central
function for your choice;
3. Double control solenoid valves have memory function;
4. Internal hole adopts special processing technology which has
little attrition friction, low start pressure and long service
life;
5. It is available to form integrated valve group with the base to
save installation space;
6. Several standard voltage grades are optional;
Main dimension of 1/4'' PT Airtac Type 4V210-08 Pneumatic Solenoid Valve:
Technical parameters of AIRTAC Type 4V200 Series Solenoid Pneumatic Valve:
| Model NO | 4V210-06 4V220-06 | 4V230C-06 4V230E-06 4V230P-06 | 4V210-08 4V220-08 | 4V230C-08 4V230E-08 4V230P-08 |
| Fluids | Air( to be filered by 40um fitter element) | |||
| Acting | Piloted | |||
| Port size | ln=Oul= Exhaust=1/8'' | ln=Out =1/4'' Exhaust=1/8'' | ||
| Orifice size | 14.0mm²(Cv=0.78) | 12.0mm² (Cv=0.67) | 16.0mm² (Cv=0.69) | 12.0mm²(Cv=0.67) |
| Valve type | 5 port 2 position | 5 port 3 position | 5 port 2 position | 5 port 3 position |
| Operating pressure | 0.15-0.8MPa(21-114Psi) | |||
| Proof pressure | 1.5MPa(215Psi) | |||
| Temperature range | -5 ~ 50°C | |||
| Material of body | Aluminum alloy | |||
| Lubrication | Not required | |||
| Max. frequency | 5 cycle/sec | 3 cycle/sec | 5 cycle/sec | 3 cycle/sec |
Details of 1/4'' PT Airtac Type 4V210-08 5 Position 2 Way Pneumatic Valve:
Application examples of 1/4'' PT Airtac Type 4V210-08 Air Control Solenoid Valve:
Video of 1/4'' PT 4V210-08 Airtac Type Pneumatic Solenoid Air Valve:
1/4'' PT Airtac Type 4V210-08 Solenoid Valve Uses:
1.Before installing, be sure the valve hasn’t been damaged via transportation.
2.It’s suggested to use the medium lubricated by 40μm filter
element. Be aware of the flow direction and port size.
3.Please notice whether the installation condition accords with
technical requirements (such as “voltage”, “actuation frequency”,
“working pressure” and “scope of application temperature”), then
the equipment can be installed and used.
4.Notice the flow direction of air during installation, P is the
air intake, A (B) is the work port and R (S) is the exhaust outlet.
5.Take measure to avoid vibration and frozen.
6.Before using the fittings and tubes make sure they are clean.
When connecting to fittings, be sure the PTFE Thread Seal Tape is
used correctly.
7.To keep the dust away, please use the silencer for the exhaust
ports. Never forget to install dirt-proof boot in air intake and
outlet during dismounting.
8.After installing, please use the manual override to test valve
first.
If you need a 4V210-08 price list, please contact us by e-mail, we will give you an affordable price.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
