Ningbo Brando Hardware Co., Ltd |
Verified Suppliers
|
|
White Color Orifice Fabric Reinforced AUTEL Type Diaphragms AE25
We offer special service for your existing system components for pneumatic pulse application, to recondition your inoperative valves and assure operating reliability as good as new.
Model | 1" pulse valve diaphragm |
Material | Nitrile Rubber |
Working ambient temperature | -20℃ to 80 ℃ |
Working pressure | 0.2Mpa to 0.6Mpa |
Working medium | Clean air |
Life expectancy | over 1 million times or 3 yeas |
You can see the detailed information as followed picture
Widely used in Bag Dust Filter System
Diaphragm's Application:
The electromagnetic pulse valve diaphragm is the diaphragm in the electromagnetic pulse valve body, which is the key to its normal operation. The electromagnetic pulse valve is the blowing air circuit switch of the pulse bag type dust collector cleaning system.
Since the pulse valve diaphragm is a flexible mechanism that requires frequent opening and closing operations to control air circulation, and requires good flexibility, and requires as high a sealing as possible, the material of the pulse valve diaphragm is directly It is related to the service life and effect of the pulse valve diaphragm. In other words, the quality of the pulse valve diaphragm directly affects the working stability of the pulse bag type dust collector cleaning system, and is also directly related to the use cost of the dust removal device. The pulse valve diaphragm has a promise of service life or number of movements. The use of a high-quality pulse valve diaphragm can directly reduce the cost of dust removal equipment.
Working principle of Pulse Valve Diaphragm:
Pulse solenoid valve through the wire to the electromagnetic body coil into the positive pulse signal, coil generated by the working flux, make the moving core suction, open the valve. When the positive pulse signal input is stopped, the moving core is released, and the moving core returns to the initial state under the action of spring force. In addition, the valve is self-maintained, which can be maintained after the positive pulse input is stopped or the power is cut off. Only when the negative pulse signal is input can it be reset. Pulse solenoid valve working principle, is the use of electrical pulse into mechanical pulsation, make pulsating gas powerful energy into momentum, release in a short time to produce great momentum, with PLC control of its pulse interval should be determined according to the rated gas pressure recovery time.
If you want know more,pls contact us quickly