Ningbo Brando Hardware Co., Ltd |
Verified Suppliers
|
|
AC 220V 1.5 Inches One-way Dust Removal Aluminium Pneumatic Pulse Valve CA35T
We specialize in the production of electromagnetic pulse valve, free of charge to provide technical advice. Our company operates in good faith and has certain guarantee for product quality.We supply pulse valves of all sizes,so if you are interested in purchasing, please do not hesitate to contact us.
Pulse solenoid valve working principle is the use of electrical
pulse into mechanical pulse so that the pulse gas into a strong
energy momentum in a short period of time to release a huge
impulse, the PLC control of its pulse interval should be based on
the rated gas pressure to determine the recovery
Pulse valve basic information
Ref.number | Working Pressure | Voltage | inlet and Out Pipe Size | Weight | Packing Dimension |
CA35T | 0.3-0.8Mpa | AC110V/AC220V | G1 1/4" G1 1/4" | 0.83Kg | 12.1x11.2x14.2cm |
Description | Standard material |
Body and Cover | Aluminium die cast |
Bleed pin | Turned aluminium |
Springs | 304ss |
Screws | 304ss |
Solenoid valve diaphragm plate:
For high temperature environment can choose resistance to high temperature diaphragm, resistance to high temperature can reach 200 ℃ above, the good is the fuel of diaphragm, and the average life expectancy from 100 ~ 150 times or more
Right-angle jet inlet and outlet
Right Angle type electromagnetic pulse valve, which is the Angle between the import and export of 90 °, suitable for gas blow pipe installation package and filter links, air flow and pulse injection gas source can provide to meet the requirements.
Dimensions:
Electromagnetic pulse valve common faults and solutions
the electromagnetic pulse valve leakage gas situation
1. After installing the electromagnetic pulse valve, air leakage is the most common problem in installation. The following are the air leakage faults and reasons:
2, install air leakage electromagnetic pulse valve body and nozzle interface air leakage wrapped raw material belt or hemp pipe clamp tightening;
3, internal leakage check whether the seal is damaged, whether the spring assembly is bad;
4. External leakage loose connection or damaged seal tighten screws or replace seal;
5. There is noise when the power is on the fasteners on the head become loose and tighten. Voltage fluctuation is not allowed, adjust the voltage.
Iron core suction surface impurities or uneven, timely cleaning or replacement.
The solenoid pulse valve coil does not work after being energized
1. Check whether the power connection is bad reconnect and connect the connector
2. Check whether the power supply voltage is within the working range - adjust to the normal position range
3. Whether the coil is unsoldered -- re-soldered
4, coil short circuit replace the coil