Ningbo Brando Hardware Co., Ltd |
Verified Suppliers
|
|
220VAC 9.5W 10.5W 400425-117 Solenoid Coil For ASCO Pulse Valve
This is a solenoid coil for asco pulse valve SCG353A047, SCG353A050, SCG353A051; ordering code: 400425-142, 400425-117; voltage: 24VDC, 220VAC; power: 9.5W, 10.5W, 11.2W; insulation class: H, F; temperature class: T, B, F; connector type: DIN 43650 Form A.
Pulse valves (also called diaphragm valves) are the “switch” for compressed air in the dust clean blowing system of the pulse bag filter. It is used to control the release of air pulses in the cleaning cycle. When the dust collector control board starts the cleaning cycle, it sends an electrical signal to the solenoid valve, and then activates the pulse valve. Inside the pulse valve, the rubber diaphragm opens and closes to release the compressed air stored in the air header. At this time, the air enters the blowing pipe above the filter through the valve, and then enters the filter down to clean the filter bag.
Ordering Code of Solenoid Valve Coil:
Dimension & Data of Solenoid Coil, Armature for ASCO Pulse Valve:
Video of 400425-142, 400425-117 Solenoid Coil:
BRANDO Solenoid Valve Coils Production Video:
More ASCO Type Pulse Valves for you to choose:
Threaded Type | Remote Pilot Type | Straight Through Type | Submerged Type |
Diaphragm | Solenoid Coil | Solenoid Armature | Pulse Controller |
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!