Home Companies YIKANG AUTOMATION

SMC Compact rotary table MSAQB10A Pneumatic Cylinder Rack Pinion Style

Contact Us

Trade Verify

Address: Liandong-U-Gu 17-2#, Shengyuan Road 1#, Jiangkou Street, Fenghua District, Ningbo City, Zhejiang Province, China

Phone: +86-

Contact name:Jaren

YIKANG AUTOMATION

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

SMC Compact rotary table MSAQB10A Pneumatic Cylinder Rack Pinion Style

City & Province	ningbo zhejiang

Product Details

SMC Compact rotary table MSAQB10A Pneumatic Cylinder Rack Pinion Style

Ordering Code: MSQB10A, Any other types please contact freely.

Order code

1) TN series are alll with magnet
2) When the thread is standard, the code is blank

Specifications

Size		10	20	30	50	70	100	200
Fluid		Air (non-lube)
Max. operating pressure	With adjustment bolt	1 Mpa
	With internal shock absorber	0.6 Mpa (Note 1)
Min. operating pressure	Basic type	0.1 Mpa
	High precision type	0.2 Mpa	0.1 Mpa
Ambient and fluid temperature		0 to 60 ℃ (with no freezing)
Cushion	With adjustment bolt	Rubber bumper
	With internal shock absorber	Shock absorber
	Shock absorber model	RBA0805 -X692	RBA1006-X692		RBA1411 -X692	RBA2015-X821		RBA2725 -X821
Angle adjustment range		0 to 190° (note 2)
Maximum rotation		190°
Cylinder bore size		ø15	ø18	ø21	ø25	ø28	ø32	ø40
Port size	End ports	M5 x 0.8		Rc 1/8
	Side ports	M5 x 0.8

Product Features
1.Enterprises standard is implemented.
2.Embeded installation and fixation mode saves the installation space.
3.It is good resistance to bending and twisting moments.
4. Mounting holes on three sides facilitates multi-position mounting.
5.Bumper in front of the barrel can adjust the stroke of cylinder and relieve impact.
6.Standard configuration of this series has magnet and the type without magnet is not available.

MSQ weight

Size		10	20	30	50	70	100	200
Basic type	With adjustment bolt	530	990	1290	2080	2880	4090	7580
Basic type	With internal shock absorber	540	990	1290	2100	2890	4100	7650
High precision type	With adjustment bolt	560	1090	1410	2240	—
High precision type	With internal shock absorber	570	1090	1410	2260	—

Rotation Direction and Rotation Angle
1. The rotary table turns in the clockwise direction where the A port is pressurized, and in the counterclockwise direction when the B port is pressurized.
2. By adjusting the adjustment bolt, the rotation end can be set within the ranges shown in the drawing for the desired rotation angle.
3. The rotation angle can also be set on a type with internal absorber.
With adjust bolt, internal shock absorber

Size	Adjustment angle per rotation of angle adjustment screw
Size	Adjustment angle per rotation of angle adjustment screw
10	10.2°
20	7.2°
30	6.5°
50	8.2°
70	7.0°
100	6.1°
200	4.9°

Note:
1. The drawing shows the rotation range of the positioning pin hole.
2. The pin hole position in the drawing shows the counterclockwise
rotation end when the adjustment bolts A and B are tightened
equally and the rotation is adjusted 180°.

Rotation Range Example
1. Various rotation ranges are possible as shown in the drawings below using adjustment bolts A and B.
(The drawings also show the rotation ranges of the positioning pin hole.)
2. The rotation angle can also be set on a type with inertial absorber.

Installation Usage
1.When load changes in the work, the cylinder with abundant output capacity shall be ed.

2.The medium used by cylinder shall be filtered to 40μm or below.
3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
5.As both the front cover and piston are short, too large stroke can not be ed.
6.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
7.The cylinder shall avoid redial load in operation to maintain the normal and extend service life.

8.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
9.If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust cap shall be ed into the inlet and outlet ports. As the precision of the manufacture and guide is high, Please do not dismantle the fixed block or cylinder cover.

Structures

Product show

Delivery
1. If the products we have in store, we will send it out ASAP after payment.
2. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
3. Also we can send by your delivery acount if you want.
4. We have a variety of ways to send goods, usually DHL, Fedex, TNL will be normal ways. If you require use of a courier, we can do it.

Products Shopping Guide
For example: you want to purchase a batch of cylinders but you don't know which type you are really want, so you can tell me all your requirement and I'll recommend to you.

After-sale Service
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.

Competitive Advantage

Our product features	Our Services Guarantee:
1) Competitive price	1) Prompt respond (Reply with 24 hours)
2) Good quality	2) Free Samples (Customer pay for the delivery cost)
3) Professional Packaging	3) Registration support.
4) Produce according to Customers’ instruction	4) Photos/videos are available during production.
5) None delay shipment	5) Loading inspection, and send loading photos before shipment.

Warranty
All item Comes with Basic 3 Month Sellers Warranty, if item defective in 3 Month, We will offer replacement without extra Charger(including shipping fee)After we Receive the Defective item.
If item Defective after 3 Month, Buyers can still send it back, We will contact suppliers or Manufactory for Warranty. Buyers Might Need to pay the Shipping fee For resend the replaced item.