YIKANG AUTOMATION |
Verified Suppliers
|
|
MHL2-25D1 MHL2-40D2 Aluminum alloy SMC Nickel plated Pneumatic
cylinders
Advantage
1.One unit can handle workpieces withvarious diameters.
2.A large amount of gripping force isprovided through the use of
adouble piston mechanism, whilemaintaining a compact design.
3.Double-end type oil-impregnatedresin bearings with a metal
backingare used for all shafts.
4.Built-in dust-protection mechanismA high degree of freedom
formounting
5.Auto switch mountable
How to Mount the Attachment to the Finger
(1) Make sure that the piston rod is retracted so as not to apply
undue strain on the piston rod whilean attachment is being mounted
to the finger.
(2) Do not scratch or dent the sliding portion of the piston rod.
Damage to the bearings or sealsmay cause air leaks or faulty
operation.
(3) Refer to the table below for the proper tightening torque on
the bolt used for securing theattachment to the finger.
Effective Gripping Force
Indication of effective gripping force.The gripping force shown in
the tablesrepresents the gripping force of onefinger when all
fingers and attachmentsare in contact with the work.F = one finger
thrust.
Gripping Point
The workpiece gripping point distance should be within the
grippingforce ranges given for each pressure in the effective
gripping forcegraphs below.
Auto Switch Mounting Brackets: Precautions
When auto switch is set on the mounting side as shown below, allow
atleast 2 mm run off space on mounting plate since the auto switch
isprotruded from the gripper edge.
Warning
If a workpiece is hooked onto the attachment, make sure that
excessive impact willnot be created at the start and the end of the
movement.
Typical Applications
Printing (Tension Control)
Semiconductor (spot welding machine, chip grinding)
Automation Control
Robot
Model
Model | Bore size (mm) | Max.operating frequency c.p.m | Opening/Closing stroke(mm) (L2-L1) | Width at closing(mm) (L1) | Width at closing(mm) (L2) | Mass (g) |
MHL2-10D | 10 | 60 | 20 | 56 | 76 | 280 |
MHL2-10D1 | 40 | 40 | 78 | 118 | 345 | |
MHL2-10D2 | 60 | 96 | 156 | 425 | ||
MHL2-16D | 16 | 60 | 30 | 68 | 98 | 585 |
MHL2-16D1 | 40 | 60 | 110 | 170 | 795 | |
MHL2-16D2 | 80 | 130 | 210 | 935 | ||
MHL2-20D | 20 | 60 | 40 | 82 | 122 | 1025 |
MHL2-20D1 | 40 | 80 | 142 | 222 | 1495 | |
MHL2-20D2 | 100 | 162 | 262 | 1690 | ||
MHL2-25D | 25 | 60 | 50 | 100 | 150 | 1690 |
MHL2-25D1 | 40 | 100 | 182 | 282 | 2560 | |
MHL2-25D2 | 120 | 200 | 320 | 2775 | ||
MHL2-32D | 32 | 30 | 70 | 150 | 220 | 2905 |
MHL2-32D1 | 20 | 120 | 198 | 318 | 3820 | |
MHL2-32D2 | 160 | 242 | 402 | 4655 | ||
MHL2-40D | 40 | 30 | 100 | 188 | 288 | 5270 |
MHL2-40D1 | 20 | 160 | 246 | 406 | 6830 | |
MHL2-40D2 | 200 | 286 | 486 | 7905 |
Specifications
Bore size(mm) | 10 | 16 | 20 | 25 | 32 | 40 |
Fluid | Air | |||||
Action | Double acting | |||||
Operating pressure(Mpa) | 0.15 to 0.6 | 0.1 to 0.6 | ||||
Ambient and fluid temperature | -10 to 60 ℃ | |||||
Repeatability | ±0.1 | |||||
Lubrication | Not required | |||||
Effective gripping force (N) at 0.5 Mpa | 14 | 45 | 74 | 131 | 228 | 396 |
Delivery
1. If the products we have in store, we will send it out ASAP after
payment.
2. If the products which were customized, we will complete the
production within a specified period of time, and send it out the
first time, we can promise it.
3. We have a variety of ways to deliver goods, usually DHL, Fedex,
TNL will be normal ways, If you require use of a courier, we can do
it.
4. Also we can send by your delivery acount if you want.
Products shopping guide
For example: you want to purchase a batch of cylinders but you
don't know which type you are really want, so you can tell me all
your requirement and I'll recommend to you.