Plastic Film Squeezing Dewatering Machine
Description:
Drying the materials by screw squeezing is the working principle.
It is used in film (agriculture films, PP woven bags, nylon
polybag, fabric bag) crushing and washing line, after the recycles
cleaned, it can quickly squeeze water out. It mainly consists of
squeezing screw, special reducer, and water drain hole. The
advantage of this machine is high squeezing efficiency and fine
drying effect.
Application:
This machine is used for squeezing and re-pelletizing PP/PE film,
woven bag, ton bags, nylon etc. it's equipped with advanced screw
extrusion system, squeezing efficiency could reach 95%. Also can
work on the accordance with washing and pelletizing line with
stable capacity and whole process automation.
1. LDPE waste film recycling and washing line
2. PE agriculture using films crushing and washing line
3. Waste PE film recycling line
4. Ethylene ground film washing, drying and regranulating line
5. Waste film recycling and washing line
6. PP woven bag recycling and washing line
Character:
1. Special squeezing principle, continuously produce;
2. Good squeezing effect, water content of the materials after
squeezed is less than 8%;
3. Compared with former dewatering machine and pipe drying system,
it greatly saves energy;
4. Keep original characteristics of mateials;
5. The materials after squeezed can be directly feed into extruder
to granulate (the function is same as detwatering machine, pipe
drying system and agglomerator ). This unit solves the film hard
feeding problem.
Features:
This machine is used for squeezing and pre-pelletizing PP/PE film,
woven bags, ton bags, Nylon etc. It's equipped with advanced screw
extrusion system, squeezing efficiency could reach 95%. Also can
work in accordance with washing and pelletizing line with stable
capacity and whole process automation.
Main technical parameter of single screw squeezing device:
Model | Main motor power | Capacity | Moisture |
YR-TSD500 | 90KW | 500kg/h | 6-8% |