Million Ming Machinery produced polypropylene grinding machine features as follows:

1, PP material melting point is low, in the milling process prone to sticky material, and our company can for this characteristic, PP material into powder

2, The highest output value of 2 and 20 mesh PP materials can reach 500kg/h

3, equipment comes with air cooling, water inlet to complete water cooling

4, user-friendly design, easy to learn

5, fully comply with the state policy, no dust pollution

Feature

1, Compared with other pulverizers, the capacity is 20-50 percent increased with same power and the energy is saved.

2, Install the dust collection device, reduce the dust pollution effectively.

3, The labor is reduced with fan discharge.

4, The door of main machine can be opened which is convenient to maintain and replace blades.

5, Adopt double cold(water and fan),the inner temperature of body is decreased and the material pulverized is not distortional. t is beneficial to pulverize the thermo-sensitive plastic, for example PVC,PE,PET,LDPE,PS,EPS,XPS,ABS,EVA,PPC.

Usage

1, With water spray cooling system. it is suitable for processing of thermal sensitive material. With unique water spray cooling system. When the temperature of main machine is higher than setting temperature, water spray automatically until the temperature decreased normally.

Note: less of water spray into to machine will be dryed quickly which will not affect material properties. It can be installed by your requirements.

2, The raw material become power by vibration principle of ultrasonic vortex wave pressure which is from the high speed rotating of main shaft.

The material is conveyed to screening system by wind conveying. The coarse materal is back to the milling chamber automatically, then pulverized again.

3, The blade adopt high quality steel which is treated by heating.after heat treatment, with good abrasion resistance. It is suitable for continuous running.

4, This size of machine is small with compact structure, fully sealed, no dust overflow.

5, The material is transferred based on own wind pressure.