|
[China]
Trade Verify
Address: Exporting Department 1710 Greenland Technology Center NO.2 Xinjian East Road Shanghai China
Contact name:Johnson Yuan
DSTHERM INDUSTRIAL LIMITED |
|
Verified Suppliers
|
|
|
DN110mm Heat Insulation 3a Hot Water Plastic Ppr Pipe
Advantage
1. Sanitary, non-toxic, no heavy metal additives, directly apply to
the water supply system.
2. Heat insulation and Saving Energy: low thermal conductivity
which is only 1/1500 of brass pipe, and 1/250 of steel pipe.
Non-toxic: no heavy metal additives would not be covered with dirty
or contaminated by bacterium.
3. Light weight, high strength and high impact strength.
4. Lower Installation Costs: light weight and good hot-melt
performance can reduce installation costs by as much as 50% over
metal piping system.
5. Convenient installation, reliable, recycled, environmental
protection and safe.
6. Corrosion Resistant: resist chemical matters or electron
chemical corrosion.
7 High Temperature Resistance: the maximum sustained working
temperature is up to 70 Degrees Celsius, the maximum transient
temperature is up to 95 Degrees Celsius.
8.Higher Flow Capacity: smooth interior walls result in lower
pressure loss and higher volume than metal pipes.
9. Long service life: more than fifty years under the normal
pressure and temperature.
Intended use
For interior hot and cold water distribution systems in buildings
and floor & central heating systems, air ducts
PN 10 - cold water distribution and floor heating systems
PN 16 - higher pressure cold water distribution and DHW systems at
lower pressures
PN 20 - hot water distribution systems, central heating
Wholesale Popular Style 3A Quality PP-R hot water pipe
| Parameters of the PPR Pipe SDR11/S5/PN10 | |||
| Nominal Outer Diameter | Diameter | Wall Thickness | Inner Diameter |
| 20 | 20 | 2.0 | 16.0 |
| 25 | 25 | 2.3 | 20.4 |
| 32 | 32 | 2.9 | 26.2 |
| 40 | 40 | 3.7 | 32.6 |
| 50 | 50 | 4.6 | 40.8 |
| 63 | 63 | 5.8 | 51.4 |
| 75 | 75 | 6.8 | 61.4 |
| 90 | 90 | 8.2 | 73.6 |
| 110 | 110 | 10 | 90.0 |
| 160 | 160 | 14.6 | 130.8 |
| Parameters of the PPR Pipe SDR9/S4/PN12.5 | |||
| Nominal Outer Diameter | Diameter | Wall Thickness | Inner Diameter |
| 20 | 20 | 2.3 | 15.4 |
| 25 | 25 | 2.8 | 19.4 |
| 32 | 32 | 3.6 | 24.8 |
| 40 | 40 | 4.5 | 31.0 |
| 50 | 50 | 5.6 | 38.8 |
| 63 | 63 | 7.1 | 48.8 |
| 75 | 75 | 8.4 | 58.2 |
| 90 | 90 | 10.1 | 69.8 |
| 110 | 110 | 12.3 | 85.4 |
| 160 | 160 | 17.9 | 124.2 |
| Parameters of the PPR Pipe SDR7.4/S3.2/PN16 | |||
| Nominal Outer Diameter | Diameter | Wall Thickness | Inner Diameter |
| 20 | 20 | 2.8 | 14.4 |
| 25 | 25 | 3.5 | 18.0 |
| 32 | 32 | 4.4 | 23.3 |
| 40 | 40 | 5.5 | 29.0 |
| 50 | 50 | 6.9 | 36.2 |
| 63 | 63 | 8.6 | 45.6 |
| 75 | 75 | 10.3 | 54.4 |
| 90 | 90 | 12.3 | 65.4 |
| 110 | 110 | 15.1 | 79.8 |
Product Description
a. Non-conductive: Good insulation, assuring a safe system
b. Smooth surface : Small friction coefficient to ensure the cables
go through smoothly
c. Fire resistance: Self-extinguishing, do not support combustion
d. Corrosion Resistance: Resistant to acids, bases and salts,
assuring a lower maintenance cost and
a longer performance life
e. Impact strength: Resistant to compression and impact, suitable
to be buried in concrete
f. Easy Installation: solvent cement and threading joining
