Active Member
|
Address: No.12 Shanghu Industrial Park,Jiangning Street, Jiangning District,Nanjing China
Contact name:Zhang
Nanjing GS-mach Extrusion Equipment Co.,Ltd |
|
|
Kneader PVC pelletizing granulator plastic granules twin single
screw extruder
The main machine of plastic granulator is extruder, which is made up of extrusion system, transmission system and heating and cooling system. The
extrusion system includes screw, barrel, hopper, die and mould. The transmission system's function is to drive the screw, which
is usually made up of motor, reducer and bearing. The heating and cooling device is a necessary condition
for the plastic extrusion process.
The application of frequency converter
The inverter has high frequency, smooth output, high control
precision,high performance vector control, RS485 serial interface, and multi control. It can replace DC speed control and servo control.
Auxiliary equipment
The auxiliary machine of the plastic granulator mainly includes the
line setting device, the straightening device, thepreheating device, the cooling device, the traction device, the meter, the
spark testing machine and the line collecting device. The use of extruder is different from that of auxiliary equipment. For example, there
is a cut-off device, dryer, printer and so on.
Machine introduction
| Model | Machine | Quantity |
| 1 | 110L Kneader | 1 set |
| 2 | Spiral feeder | 1 set |
| 3 | Twin screw metering feeder | 1 set |
| 4 | GS-65 twin screw extruder | 1 set |
| 5 | Connector | 1 set |
| 6 | GSD-150 single screw extruder | 1 set |
| 7 | hydraulic plate automatic screen changer | 1 set |
| 8 | Air cooling hot cutting system | 1 set |
Preheating device
In the process of plastic extrusion, the preheating can eliminate
the difference between the cold line and the plastic contact, which
can avoid the fluctuation of the plastic temperature, thus
stabilizing the extrusion pressure and ensuring the extrusion
quality.
Cooling system
Formed plastic extrusion cladding should be cooled immediately
after leaving the nose,otherwise it will deform under the action of gravity. The way of cooling
usually adopts water cooling, and is divided into quench and slow cooling according to different
water temperature.
Control system
The control system of the plastic granulator consists of the
heating system, the cooling system and the measurement system of
the process parameters, which are mainly composed of electrical
appliances, instrumentsand actuators (the control panel and the operating table). Its main
function is to control and adjust the drag motor of the main
auxiliary machine, output the speed and power that conforms to the
process requirements, and coordinate the work of the main and
auxiliary machines, detect and adjust the temperature, pressure and
flow of plastic in the extruder, and realize the control or
automatic control of the whole unit.
Main Technical Parameters:
| Kneader | Capacity | 110L |
| Output | 100-140 kg/batch | |
| Motor power | 180 kw | |
| GS-75 twin screw extruder | Main motor power | 132 kw |
| screw diameter | 71 mm | |
| Screw L/D | 36:1 | |
| GSD-180 single screw extruder | Main motor power | 75kw |
| Screw diameter | 180 mm | |
| screw L/D | 9:1 |
After-sale service & Technical support:
Pre-sales services
* Any concerns of our machine by email/phone will be replied ASAP
within 24 hours
* Inquiry and consulting support
* Quick reply.
* View our factory
After-sales service
* Traning how to install the machine, training how to use the
machine
* Engineers are available to service machinery overseas
* One year guarantee for the machine expect the spare part, we can
supply lifelong technology service to solve any problem form you.
Contact
Nanjing GS-mach Extrusion Equipment Co., Ltd
No.12 Shanghu Industrial Park,Jiangning Street, Jiangning District,
Nanjing China
Mobile Phone/ Whatsapp: +86 18851021602
Tel: 86-25-81030382-8:00~17:00
Fax: 86-25-52790852
Email: extruder5@njgsmach.com
Web: http://www.plasticpelletextruder.com
Product Picture:
