Graphene conductive wet coating composite extrusion line film
lamination machine
The whole production line is closed, the internal temperature of
the drying tunnel is monitored as a whole. The coating die adopts
slit type and is equipped with effective adjustment device. The
extrusion die is adjusted by automatic die. The winding device
adopts automatic tension winding and shearing. Automatic stacking
of equipment, automatic machine
Machine Composition
1.0 | Squeeze host | 1 |
1.0.1 | Squeeze host | 1 |
2.0 | Single station filter | 1 |
3.0 | Solution static mixer | 1 |
4.0 | JCTIMES special type mould | 1 |
5.0 | Screw feeding device | 1 |
6.0 | Hopper dryer | 1 |
7.0 | Laminating composite molding system | 1 |
8.0 | Dust collecting device above the mold | 1 |
9.0 | PSC online infrared detection system | 1 |
10.0 | Imported photoelectric correcting device | 1 |
11.0 | Static elimination device | 2 |
12.0 | A double station unwinding system | 1 |
13.0 | Imported photoelectric correcting device | 1 |
14.0 | Static elimination device | 2 |
15.0 | B double station unwinding system | 1 |
16.0 | LED lighting observation device | 1 |
17.0 | Shear pneumatic cutting knife set | 1 |
18.0 | Edge air conveying device | 1 |
19.0 | Traction system | 1 |
20.0 | Double station automatic winding system | 1 |
21.0 | Coil unloading device | 1 |
22.0 | SIEMENS Central Control System | 1 |
About the Single station filter
After the filter plate is produced for a period of time, the
plastic melt enters the flow channel, and when a predetermined
pressure difference is formed, the mesh should be changed. The net
change work pushes the shutter to move accordingly through the
hydraulic system, prompting the filter plate to exit the working
position while the other filter plate enters the working position,
and then opens the protective cover when stopping the movement. Use
the tool to quickly clean the melt around the shutter and the
filter hole, remove the old filter mesh, and replace it with a new
one to complete the job. This machine is equipped with a network
front pressure sensor and display to monitor the blockage of the
filter to ensure timely network change. The friction pair of the
screen changer is made of high-hardness and wear-resistant material
to ensure long-term use.
About Solution static mixer
The highly efficient and energy-saving static mixer has a special
structure of mixing elements, which are composed of a plurality of
intersecting steel bars (bars) arranged at right angles, separated
by a 45 degree angle, so that the flowing melt is divided and
merged multiple times. The orientation is changed to further
promote the uniform dispersion and plasticizing performance of the
melt. It is usually used in extruders with very high precision
requirements.
About SIEMENS Central Control System
This control system uses imported electrical components. The
central control unit mainly adopts the German SIEMENS-CPU-315
series or better than the above; the human-machine interface
selects the German SIEMENS-TP270; the temperature control unit
adopts the CPU temperature control module; the extruder Siemens
Beide's high-performance governor; The speed of the film machine is
imported and controlled by the field bus. The line speed can be
adjusted between 0 and 50 m/min. The high-performance vector speed
controller of Siemens Beide is used for winding. The specific
parameter setting can be realized by touch screen.
Other products:
High-speed coating production line (single-sided coating
double-sided coating)
Single-layer, multi-layer co-extruded cast film extrusion line
PET food grade blister sheet production line (crystalline)
PVDF fluoroplastic single layer, (board) sheet extrusion line
PVB automotive glass film production line
3D film embossing production line
Biaxially oriented film production line
Casting line
PE breathable film production line
PLA degradable sheet production line
Graphene conductive wet coating composite extrusion line