A1: Grinding chamber; Cutter head and grinding disc are air-cooled
and water-cooled, especially suitable for processing thermoplastic
materials;
A2: Transmission device of the pulverizer; Adopts European-style
belt wheel, high-speed operation is not loose, and it is more
convenient for daily maintenance;
A3: Pulverizer blade; PVC cutter head is made of wear-resistant
steel material, special tooth shape design, double the service
life; the frequency of use of the cutter head is determined
according to the material, usually grinding to 400 tons needs to be
replaced. (Depending on the blade wear condition);
PE/PET/LDPE/ABS/EVA/PC/FIBER grinding disc adopts SKD-11; tungsten
steel;stainless steel whole plate material, special tooth shape
design, double service life; cutter head The frequency of use is
determined according to the material, and usually the grinding
powder to 400 tons needs to be replaced. (It depends on the wear of
the blade);
A4: Mill knife adjustment system; Combined with German technology,
taking into account the convenience of customers, the knife
adjustment of the cutter needs to remove the movable cutter disc,
add or subtract washers, and adjust the disc clearance to ensure
that there is no abnormal noise; The adjustment knife is
distributed outside the grinding disc. According to the thickness
of different materials, the bolts outside the grinding disc are
adjusted at the same time. After the nuts are locked, the gap
between the four bolts can be ensured.
A5: Refueling device for the mill; especially an oil pump refueling
device is added, which is convenient for users to refuel daily work
without stopping the machine;
A6: The mill is externally exhausted; The air volume reaches 1704
m3/h, and most of the heat is taken away by the temperature
difference between the inlet and outlet air. A small part of the
heat is solved by water cooling.The inlet temperature of cold water
is required to be no more than 25°C, and the outlet water
temperature is no more than 45°C. In summer, the cooling tower can
be used to circulate water to lower the temperature.
A7: Fully automatic, automatic feeding, discharging and sorting;