Home Companies Zhangjiagang Beisu Machinery Co., Ltd.

8mm Feeding Size 250-450kg/H Plastic Milling Machine

Contact Us

[China]

Trade Verify

Address: No.12, Yuefeng Road, Nanfeng Town, Zhangjiagang City, China

Contact name:Batsita

Zhangjiagang Beisu Machinery Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

8mm Feeding Size 250-450kg/H Plastic Milling Machine

Country/Region	china

Product Details

Application of high speed mill: The high-speed and high-efficiency pulverizer manufactured by Beisu Machinery is especially suitable for TPU, LLDPE, PVC, PE, PET, EVA, PP, PA, rubber, and various rigid, soft, elastomer, low-temperature materials, and film materials. , Sheet thermoplastic materials. According to the classification of the grinding materials, the mills are mainly divided into two categories: rotor (turbine) mills and disc mills.

The working principle of the high-speed mill: The high-speed rotation of the grinding disc driven by the main shaft of the plastic pulverizer collides with the fixed cutter disc, cutting the material into powder (without sieve). The ground fine powder is brought into the vibrating screen along with the circulating air of the blower for sorting. The coarse material falls back to regrind, and the qualified fine powder enters the finished product storage with the cyclone and is discharged through the powder outlet pipe. That is the finished product. The air is discharged from the dust collector.

PVC Pipe /Ceiling/ Board/ Films/ Sheets Pulverizer milling:

PE/PET/ABS/PA/TPE/LLDPE/EVA Puverizer:

PVC/WPC Pulverizer:

Model	MF400	MF500	MF600	MF800
Rotary blade QTY	18	24	26	40
Fixed blade QTY	10	12	15	20
Main motor power	30kw	45kw	55kw	75kw
Blade material	high chromium alloy	high chromium alloy	high chromium alloy	high chromium alloy
Capacity	100-150kg/h	250kg/h	350kg/h	500kg/h

PE/PET/ABS/PA/TPE/LLDPE/EVA Puverizer:

Model	MF400	MF500	MF600	MF800
Diameter of blade	400mm	500mm	600mm	800mm
Main motor power	30kw	37kw	45kw	75kw
Blade material	SKD-11 or D53	SKD-11 or D53	SKD-11 or D53	SKD-11 or D53
Capacity	100-150kg/h	250kg/h	350kg/h	500kg/h

The core patents of the high-speed pulverizer milling machine:

A1: Grinding chamber; Cutter head and grinding disc are air-cooled and water-cooled, especially suitable for processing thermoplastic materials;

A2: Transmission device of the pulverizer; Adopts European-style belt wheel, high-speed operation is not loose, and it is more convenient for daily maintenance;

A3: Pulverizer blade; PVC cutter head is made of wear-resistant steel material, special tooth shape design, double the service life; the frequency of use of the cutter head is determined according to the material, usually grinding to 400 tons needs to be replaced. (Depending on the blade wear condition); PE/PET/LDPE/ABS/EVA/PC/FIBER grinding disc adopts SKD-11; tungsten steel;stainless steel whole plate material, special tooth shape design, double service life; cutter head The frequency of use is determined according to the material, and usually the grinding powder to 400 tons needs to be replaced. (It depends on the wear of the blade);

A4: Mill knife adjustment system; Combined with German technology, taking into account the convenience of customers, the knife adjustment of the cutter needs to remove the movable cutter disc, add or subtract washers, and adjust the disc clearance to ensure that there is no abnormal noise; The adjustment knife is distributed outside the grinding disc. According to the thickness of different materials, the bolts outside the grinding disc are adjusted at the same time. After the nuts are locked, the gap between the four bolts can be ensured.

A5: Refueling device for the mill; especially an oil pump refueling device is added, which is convenient for users to refuel daily work without stopping the machine;

A6: The mill is externally exhausted; The air volume reaches 1704 m3/h, and most of the heat is taken away by the temperature difference between the inlet and outlet air. A small part of the heat is solved by water cooling.The inlet temperature of cold water is required to be no more than 25°C, and the outlet water temperature is no more than 45°C. In summer, the cooling tower can be used to circulate water to lower the temperature.

A7: Fully automatic, automatic feeding, discharging and sorting;