Home Companies Zhangjiagang Beisu Machinery Co., Ltd.

315mm - 630mm HDPE / PE Pipe Production Line Low Temperature Impact Resistance

Zhangjiagang Beisu Machinery Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: No.12, Yuefeng Road, Nanfeng Town, Zhangjiagang City, China

Contact name:Batsita

Inquir Now

Zhangjiagang Beisu Machinery Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

315mm - 630mm HDPE / PE Pipe Production Line Low Temperature Impact Resistance

Country/Region china
InquireNow

Product Details

Under ground 315mm~630mm HDPE gas pipe machine extrusion line

 

Advantage of HDPE pipe:

 

Reliable connection: the polyethylene pipe system is connected by electric hot melt method, and the strength of the joint is higher than the strength of the pipe body.
Low temperature impact resistance: Polyethylene has a very low temperature embrittlement temperature and can be safely used in the temperature range of -60-60 °C. In winter construction, due to the good impact resistance of the material, no brittle cracking will occur.
Good resistance to stress cracking: HDPE has low notch sensitivity, high shear strength and excellent scratch resistance, and environmental stress cracking resistance is also outstanding.
Good chemical resistance: HDPE pipes are resistant to corrosion by a variety of chemical media, and chemicals present in the soil do not cause any degradation to the pipe. Polyethylene is an electrical insulator, so it does not rot, rust or electrochemically corrode; it also does not promote the growth of algae, bacteria or fungi
Anti-aging, long service life: Polyethylene pipes with 2-2.5% evenly distributed carbon black can be stored or used outdoors for 50 years without damage from UV radiation.
Good wear resistance: The comparison of wear resistance of HDPE pipe and steel pipe shows that the wear resistance of HDPE pipe is 4 times that of steel pipe. In the field of mud transport, HDPE pipes have better wear resistance than steel pipes, which means HDPE pipes have a longer service life and better economy.
Good flexibility: The flexibility of the HDPE pipe makes it easy to bend, and the engineering can bypass the obstacle by changing the direction of the pipe. In many cases, the flexibility of the pipe can reduce the pipe usage and reduce the installation cost.
Low water flow resistance: The HDPE pipe has a smooth inner surface with a Manning coefficient of 0.009. Smooth performance and non-adhesive properties ensure that HDPE pipes have higher conveying capacity than conventional pipes, while also reducing pipe pressure loss and water delivery energy consumption.
Convenient handling: HDPE pipes are lighter than concrete pipes, galvanized pipes and steel pipes. They are easy to handle and install. The lower manpower and equipment requirements mean that the installation cost of the project is greatly reduced.
A variety of new construction methods: HDPE pipelines have a variety of construction techniques, in addition to the traditional excavation methods, a variety of new non-excavation techniques such as pipe jacking, directional drilling, liners, cracking Construction by pipe, etc. This is the only option for some places that are not allowed to be excavated.

 

 

Brief introduction of PE pipe production process:

 

The first step, raw material compounding and drying: PE pellets and water supply pipes are purchased from PE pellets, first mixed with the added masterbatch and antistatic masterbatch (gas tube) in the mixing mixer. After uniformity, the uniformly mixed material is pumped into a storage tank having a heating and drying function by a suction machine.

The second step, the plasticizer extrusion molding of the extruder: the extruder screw barrel and the molding die are electrically heated by the externally coated heating ring, and the working temperature is 160-220 °C. The material enters the extruder barrel from the storage hopper, and is conveyed, metered, plasticized, and compressed into the molding die under the conveying and shearing of the spiral rib. A small amount of mixed color strands are heated and plasticized by a small screw extruder to enter from the side of the mold. The two materials are mixed and extruded through a die.

The third step, vacuum setting cooling: the formed material passes through the sizing sleeve into the vacuum cooling box for shaping and pre-cooling, and then after two stages of cooling to cool to normal temperature and complete the shaping process.

The fourth step, printing, drawing, cutting, turning and winding: the shaped pipe is printed, and the length is measured under the traction, and the cutting machine enters the turning frame or the winding machine (for the pipe below DN50), and Cut to the set length.

The fifth step is to inspect the qualified products into the warehouse: the cut products are inspected and the qualified products enter the warehouse. The non-conforming product and the waste scrap produced during the production process are crushed and returned to the production system for reuse.

 

 

Details specification pictures of HDPE pipe production line by BEISU Machinery:

 

 

 

Main technical parameter:

 

Pipe range16-63mm20-110mm75-160mm90-250mm110-315mm160-500mm315-630mm500-800mm
Extruder65mm65mm75mm75mm90mm90mm120mm150mm
Extruder power37kw56kw110kw110kw160kw185kw250kw335kw
Extrusion capacity60-kg/h100-150kg250-300kg250-300kg350-400kg400-500kg450-750kg750-1000kg
Max.production speed10m/min6m/min6m/min6m/min3m/min2m/min0.9m/min0.7m/min

 

Hot Products

SJSZ65/132 UPVC/CPVC/OPVC conical twin screw extruder with SIEMENS PLC Application; SJSZ-65/132 twin...
#detail_decorate_root .magic-0{width:750px}#detail_decorate_root .magic-1{overflow:hidden;width...
Single Screw Extruder For PE/PU/PEEK/PVC Filament And Masterbatch #detail_decorate_root .magic-0...
#detail_decorate_root .magic-0{width:750px}#detail_decorate_root .magic-1{overflow:hidden;width...
#detail_decorate_root .magic-0{width:750px}#detail_decorate_root .magic-1{overflow:hidden;width...
#detail_decorate_root .magic-0{width:750px}#detail_decorate_root .magic-1{overflow:hidden;width...