Active Member
|
[China]
Address: No.888, Kungang Rd, Songjiang Sci. & Tech. Park, Shanghai, P. R. China
Contact name:Vivian Chen
shanghai Guangsu Manufacture Co.ltd |
|
|
Specification:
| GS98V | ||||
A | B | C | |||
INJECTIONUNIT | Screw Diameter | mm | 32 | 36 | 40 |
Screw L/D Ratio | L/D | 22.5 | 20 | 18 | |
Shot size(Theoretical) | cm3 | 121 | 153 | 188 | |
PS) Injection Weight | g | 110 | 139 | 171 | |
PS Injection Rate | g/s | 66 | 84 | 104 | |
PS Plasticizing capacity | g/s | 9.9 | 11.3 | 13.9 | |
Injection Pressure | Mpa | 237 | 188 | 152 | |
Screw Speed | Rpm | 0-205 | |||
CLAMPINGUNIT | Clamp Tonnage | KN | 900 | ||
Toggle stroke | mm | 320 | |||
Space Between Tie Bars | mm | 360*360 | |||
Max.Mold Height | mm | 380 | |||
Min.Mold height | mm | 150 | |||
Ejector stroke | mm | 100 | |||
Ejector tonnage | KN | 33 | |||
Ejector Number | piece | 5 | |||
OTHERS | Max.Pump Pressure | Mpa | 17.5 | ||
pump motor power | KW | 7.5 | |||
Heater Power | KW | 6.2 | |||
Machine Dimension(L*W*H) | m | 4.32*1.2*1.86 | |||
Machine Weight | t | 3.46 | |||
PS Hopper Capacity | Kg | 25 | |||
Oil Tank Capacity | L | 240 | |||
Product details
Features
1) All computer control system
2) Super silence hydraulic circuit
3) High speed and high-pressure injection, ideal for high precision
and thin walled molding products
4) Real-time injection process curve display
5) Enlarged clamping stroke to meet with larger stroke
requirements
6) 4-stage of injection speed, 3-stage of holding pressure, 4-stage
of metering phase can be setup according to products'
requirements
7) Optimal platen design, with toggle junction casting together
with platen improves rigidity of mechanical system hence improves
product dimensions accuracy
8) Screw and barrel are made of high quality new materials, which
extended their working life
9) All hydraulic components and seals are offered by famous
international manufacturers
The GS-V plastic injection machine with variable pump series is the fine product of energy saving of Guangsu Company, which adopt the advanced international control technology of variable pump. The product adopts high response proportional variable system, making the output power of hydraulic system of plastic injection machine matching with the actual consumption, avoiding the loss of high pressure regulated flow and overflow. Compared to the machine with common constant flow pump, 30%50% electricity can be saved, showing obvious economic benefits.
In addition, the heat produced by the machine is low, reducing around 30% cooling water consumption, reducing noise around the machine, extending the service life of hydraulic seals of oil circuit and hydraulic oil, reducing greatly the use and maintenance cots of machine, at same time, the strict global environment-friendly requirements are satisfied. The GS-V plastic injection machine with variable pump series brings obvious economic benefits to wide customers relying on its excellent performance.
The GS-V plastic injection machine with variable pump series shows its excellent performance as below:
Energy saving 30-50%;
Quick response of system, short shaping period;
The oil temperature of system reduces greatly the produced heat;
Reduce the mold opening/closing impact, extending the service life of machine and mold;
Extend the service life of oil circuit system, reducing maintenance times, and saving large amount of maintenance cost;
High accuracy demand on hydraulic oil; and high accuracy return filter is provided.
