Home Companies Shandong Honest Machinery Co., Ltd.

Carton Steel Metal Portable Cnc Plasma Cutting Machine 1300x2500Mm

Active Member

Contact Us

[China]

Address: Licheng Area,Jinan city,Shandong Province

Contact name:Yang

Shandong Honest Machinery Co., Ltd.

Carton Steel Metal Portable Cnc Plasma Cutting Machine 1300x2500Mm

Country/Region	china
City & Province	jinan shandong
Categories	Plasma Welders

Product Details

1300 X 2500 Mm Carton Steel Metal Portable Cnc Plasma Cutting Machine

Product Information:

Plasma arc cutting machine is the use of plasma cutting technology for metal materials processing machinery.Plasma cutting is the use of high temperature plasma arc heat to make the workpiece cut metal part or local melting (and evaporation), and by the momentum of high speed plasma to eliminate the molten metal in order to form a cut of a processing method.Plasma cutting machine with different working gas can cut a variety of oxygen cutting difficult to cut metal, especially for non-ferrous metals (stainless steel, carbon steel, aluminum, copper, titanium, nickel) cutting effect is better;Its main advantage is that when cutting the thickness of the metal is not big, the plasma cutting speed is fast, especially when cutting ordinary carbon steel sheet, the speed can reach 5~6 times of oxygen cutting method, cutting surface smooth, small thermal deformation, almost no heat affected zone.

Product Datas:

Model	1530	1325	2040	Optail
X,Y working area	1500*3000mm	1300*2500mm	2000*4000mm
Z working area	150mm
Lathe bed	Very thick steel structure
Machine Power	8.5kw
Working voltage	380V three phase 60hz
Reposition precision	0.02mm
Processing precision	0.1mm
Maximum cutting speed	12000mm/min
Torch Height control mode	Automatic
Cutting thickness	Max 25mm carbon steel
Plasma power supply	LGK120A
Control system	STARfire
Motors	Stepper motor
Software	Starcam
Weight	1600KG
Plasma Air Pressure	Max.0.8Mpa
Working Temperature	-10°C-60°C. Relative Humidity, 0-95%.
LCD Display Dimension	7 Inches

Product Advantage:

A.We do this line many years, have rich experience and professional knowledge, will let you get the most suitable machine with the right configuration. This ability can let you avoid many mistake and avoid some trouble. Other factory usually lack this experience, and bring some trouble for the real customer.

B.If use the plasma cutting machine to cut the the thick meal, have to use the arc height adjust system, while our height adjust system use the high sensor, one minute can send out 12,000 signal per minute, while other height adjust system usually send out 10000 signal per minute, so our cutting quality more better than other factory and cutting speed a litter faster than the same power plasma source.

C.we equipped the two fan for take the cutting smoke out from the room, front fan will blow to back, the back fan will exhaust the smoke out from the machine and out from the room. This way, will efficiency to let the workshop in the good environment. While other factory does not have this fan or only have one.

D. All our machines have to be checked three times, then allow to send out ,and finally will put one 8GB flash disk into the package, when the customer received the machine, can easy check the video from the 8GB flash disk ,then do the easy operation, in the video nearly like hand by hand do the teaching job, so can let the customer in the shot time to let the machine create the profit. While we also have the video platform, after you purchase the machine, we will give you one password, then you can easy to get the efficiency “after-sell service” from the internet. While other small factory usually, only check one time for the machine,
and no 8GB flash disk, and no video platform, then it is hard for you to get the good after-sell service.

E. The painting: all our machine body have been processed by professional anti-rust treatment. First, we spray 2 times anti-rust paint to ensure that all parts of the machine in a fully protected state, and then spray color. This can effectively prevent the machine rust, resulting in damage to the machine. Other manufacturers do not take anti-rust treatment or only spay 1 time rust paint.

Factory Certifications:

All products are available upon request, with or without trademarks.If you need OEM service with your own brand or product,please let us know,If you have any other specific requirements,please feel free to contact us.

Our factory has obtained the import and export license issued by the Ministry of foreign trade,and passed the ISO9001 quality management system certification and CE certification.In the quality layer by layer,we will wholeheartedly serve for the majority of customers.