Active Member
|
[China]
Address: Licheng Area,Jinan city,Shandong Province
Contact name:Yang
Shandong Honest Machinery Co., Ltd. |
|
|
3000 X 1500 Mm Non-Ferrous Metal Cutting Fiber Laser Cutting Machine On Discount
Product Information:
Fiber laser is a new type of fiber laser that is newly developed in the world. It outputs high-energy-density laser beam, which is concentrated on the surface of the workpiece, so that the area irradiated by the ultra-fine focus spot on the workpiece is instantly melted and vaporized, and the spot is moved by the numerical control mechanical system. Realize automatic cutting by irradiating position, fast speed and high precision.
Product Data:
| Model | HN-3015 |
| Working area | 3000mm x 1500mm |
| Laser type | Fiber laser |
| Rated laser power (optional) | 1000W |
| Traditional system | Gantry double drive structure |
| lubrication system | Fully automatic |
| Maximum speed | 100m/min |
| Maximum acceleration | 1.0G |
| positioning accuracy | ±0.01mm/1000mm |
| Repeated positioning accuracy | ±0.03mm/1000mm |
| Support for graphic formats | CAD, DXF(etc) |
| work environment | 0-40 ℃, humidity ≤ 80%, no condensation |
| Total power | 20KW |
| Power demand | Three phase 380V / 50Hz / 60Hz |
| Outline size | 4450mm x 2450mm x 1800mm |
| Total weight approximately | 4000KG |
Product Advantage:
The processing speed is very high. For thin plate cutting, its speed is 5-6 times that of Co2.The time required for perforating before cutting is also different. The time that used to take 3-5 seconds (Co2) can be reduced to 1-2 seconds (fiber).
Compared with the carbon dioxide cutting machine, the operating cost is low.The laser gas used in the oscillator is zero. As the processing speed becomes faster, the consumption of auxiliary gases (oxygen, nitrogen, etc.) is reduced by about 20%.
Product Application:
Sheet metal processing: With the rise of the laser cutting machine industry, the sheet metal processing industry's introduction of laser cutting technology has enabled the sheet metal industry to develop rapidly, and fully reflects the ability of laser cutting to produce flexible production and process design capabilities And precision processing and manufacturing capabilities, can meet the processing requirements of multi-variety, multi-batch, small batch, non-standard and high-precision processing.
In the past, the cost of a device shell mold was generally as high as hundreds of thousands or hundreds of thousands. Although opening a mold or some simple molds can complete complex equipment shells and other mechanical accessories, the mass processing cycle only takes more than ten days, but the mold development and production are enough It takes several months, and requires repeated mold repairs, and the accuracy is poor. Nowadays, it is the era of information technology. Products are updated quickly, and small batch production has become the mainstream mode of sheet metal processing. In this mode, the application of laser cutting machines greatly saves the cost of mold opening and secondary processing. Shorten the production cycle, which cannot be achieved by other hardware processing and die stamping. It is reported that the sheet metal industry has saved tens of billions of yuan in the sheet metal processing industry every year after the laser cutting machine was put into use.
