50L Planetary Concrete Mixer Minimum Size Easy Maintenance Quick Mixing PMC50 Low Noise

 Precast Concrete Mixer Minimum Maintenance PMC50
 Replaceable Mixing Blades
 
 
The use of mixer
1. Before use, the machine should have an empty test. Before the test machine, the firmness of all the connecting parts of the machine table shall be checked first, especially if the bearing part is loose during transportation. Close the main switch, access the power supply, run the empty test machine.
2. Empty machine test. The mixer can only be put into production without abnormal sound, high heat of bearing gear, etc.
3. If abnormal vibrations or strange sounds are detected during use, stop the mixer and give a thorough inspection.
4. Managers should be familiar with the technical performance, internal structure, control structure, and operating principle of the mixer. Do not leave the workplace during operation to prevent malfunctions and damage to mechanical parts, so as to ensure safe production.
5. The load should not be too large. It is generally measured by the load of the motor. The load current of the 380V motor when stirring the material should not exceed 6 amps. If it exceeds the load, the stirring capacity should be reduced immediately.
 
The performance characteristics of Mixer
 
1. Reasonable design and performance optimization of the whole machine
2. Firm and reliable, life factory;
3. Convenient use and maintenance;
4. Convenient operation and fast discharging speed;
5. Good mixing quality and high efficiency
6. Low energy consumption and low noise
 
 
Principle of Motion: Mixing with no hidden corners in the mixing pan by installing mixing tools and scraper tools on a specially designed drive system. The mixing track as follows.