1 - 3min Mixing Time Planetary Concrete Mixer Small Space Required PMC500 750L

1-3min Mixing Time Planetary Concrete Mixer Small Space required PMC500

The performance characteristics of Mixer

1. Reasonable design and performance optimization of the whole machine

2. Convenient use and maintenance;

3. Firm and reliable, life factory;

4. Good mixing quality and high efficiency

5. Convenient operation and fast discharging speed

6. Low energy consumption and low noise

Transmission System

The gearbox unit specially designed for a balanced distributor of power to the various mixing device and realize rotation and revolution, ensuring a high efficiency and low noise rotation. The structure is compact, and the deep mixing the internal part of the gearbox will not adhere to the material and increase the cleaning space of the blender.

Hydraulic Unit

The hydraulic discharging system is equipped with manual door opener, which can be opened manually in case of power failure.

The use of mixer

1. Before use, the machine should have an empty test. Before the test machine, the firmness of all the connecting parts of the machine table shall be checked first, especially if the bearing part is loose during transportation. Close the main switch, access the power supply, run the empty test machine.

2. Empty machine test. The mixer can only be put into production without abnormal sound, high heat of bearing gear, etc.

3. If abnormal vibrations or strange sounds are detected during use, stop the mixer and give a thorough inspection.

4. The load should not be too large. It is generally measured by the load of the motor. The load current of the 380V motor when stirring the material should not exceed 6 amps. If it exceeds the load, the stirring capacity should be reduced immediately.

5. Managers should be familiar with the technical performance, internal structure, control structure, and operating principle of the mixer. Do not leave the workplace during operation to prevent malfunctions and damage to mechanical parts, so as to ensure safe production.

Principle of Motion: Mixing with no hidden corners in the mixing pan by installing mixing tools and scraper tools on a specially designed drive system. The mixing track as follows.