|
[China]
Trade Verify
Address: Room 1008, TongLe Business Mansion, JiaXing 314033, ZheJiang, China
Contact name:Leo Wu
ZHEJIANG TOP BEARINGS CO., LTD. |
|
Verified Suppliers
|
|
|
THIN-WALLED BIMETALLIC BEARINGS WITH STEEL-BACKED BEARINGS CHEAP
PRICE MANUFACTURER IN CHINA.
LARGEST SELECTION
OF SLIDING BUSHING MATERIALS IN THE COUNTRY
You can find the largest bimetal bearings Automobile Plain Bushes
at viiplus china. Choose from your bushing bearings and order right
away.JF bimetal composite bearings with high quality low carbon steel as
substrate, the surface of the sinter with low friction properties
of copper alloy (CuPb10Sn10 CuPb6Sn6Zn3 CuPb24Sn4, CuPb30) as wear-resisting layer of bearing, can need according to the
operating conditions of copper alloy surface processing of various types of oil tank, oil hole, hole, etc., in order to suit to cannot continue to go hard or go
occasion.The material can get good bonding strength and best
bearing capacity through secondary sintering and secondary
extrusion.
| BIMETAL BUSHINGS | BIMETAL BUSHINGS | BIMETAL BUSHINGS | BIMETAL BUSHINGS | BIMETAL BUSHINGS | BIMETAL BUSHINGS | |
| CuPb10Sn10 | CuPb24Sn4 | CuPb6Sn6Zn3 | CuSn10 | CuSn6.5P | AlSn20Cu | |
| Cu | allowance | allowance | allowance | allowance | allowance | 0.7~1.3 |
| Pb | 9.0~11.0 | 21.0~27.0 | 2.0~4.0 | 0.1 | 0.1 | - |
| Sn | 9.0~11.0 | 3.0~4.5 | 5.0~7.0 | 9.0~10.0 | 6.0~6.8 | 17.5~22.5 |
| Zn | 0.5 | 0.5 | 5.0~7.0 | 0.3 | 0.3 | - |
| P | 0.1 | 0.1 | 0.1 | 0.1 | 0.1~0.3 | - |
| Fe | 0.5 | 0.7 | 0.6 | 0.5 | 0.6 | 0.7 |
| Ni | 0.5 | 0.3 | 0.3 | 0.5 | 0.5 | 0.1 |
| Al | - | - | - | - | - | allowance |
| Other | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
With carbon steel as matrix, surface sintered bronze powder; It is
suitable for rocking motion and rotating motion under high load and
low speed. It has the characteristics of low friction coefficient, good wear resistance, long service life and good bite resistance. The surface of copper alloy layer can be processed into various
types of oil groove, oil storage pit and oil hole according to the
working conditions, so as to be suitable for occasions where
refueling is not possible or difficult.
Products are widely used in construction machinery used for
supporting wheel shaft sleeve, supporting belt wheel shaft sleeve,
tensioning wheel shaft sleeve, automotive balance shaft sleeve,
steel plate sleeve, steering knuckle-main shaft sleeve, connecting
rod shaft sleeve, valve rocker arm shaft sleeve, camshaft shaft
sleeve, differential shaft sleeve, thrust gasket, piston pump side
piece, gear pump side piece.
Product Tags:
 |
