|
[China]
Trade Verify
Address: Room 1008, TongLe Business Mansion, JiaXing 314033, ZheJiang, China
Contact name:Leo Wu
ZHEJIANG TOP BEARINGS CO., LTD. |
|
Verified Suppliers
|
|
|
1. Sintered copper alloy layer CuSn10Pb10: it has good wear resistance and excellent bearing capacity, low friction
factor and good bite resistance.
2. Carbon steel substrate: provide bearing capacity and good heat
transfer.
| Pb(%) | Fe(%) | Ni(%) | Zn(%) | Cu(%) |
| 8.0-11.0 | ≦0.25 | ≦1.5 | ≦2.0 | 78.0-87.0 |
| Max.Load | Static | 250N/mm² | Alloy Hardness | HB 60-100 | |
| 140N/mm² | |||||
| Temp | -40℃~+250℃ | ||||
| Coefficient of friction | 0.05~0.12 | ||||
| Max.Speed | Max.Speed | 2.5m/s | Thermal conductivity | 60W(m*k)-1 | |
| Max.PV | Max.PV | 2.8N/mm²*m/s | |||
| Shear strength | Shear strength | 170N/mm² | |||
| Coef.of yhermal exoansion | 14*10-6K-1 | ||||
Type:-Flanged
-Solid Bronze
-Welded Joint
-Split Joint
-Clench Lock
-Sintered / Powder Metal
-Graphite Impregnated
| Type | Spec | Type | Spec | ||
| BIMETAL BUSHINGS | 1010 | 12×10×10 | BIMETAL BUSHINGS | 2830 | 32×28×30 |
| BIMETAL BUSHINGS | 1015 | 12×10×15 | BIMETAL BUSHINGS | 2840 | 32×28×40 |
| BIMETAL BUSHINGS | 1020 | 12×10×20 | BIMETAL BUSHINGS | 3015 | 34×30×15 |
| BIMETAL BUSHINGS | 1210 | 14×12×10 | BIMETAL BUSHINGS | 3020 | 34×30×20 |
| BIMETAL BUSHINGS | 1215 | 14×12×15 | BIMETAL BUSHINGS | 3025 | 34×30×25 |
| BIMETAL BUSHINGS | 1220 | 14×12×20 | BIMETAL BUSHINGS | 3030 | 34×30×30 |
| BIMETAL BUSHINGS | 1410 | 16×14×10 | BIMETAL BUSHINGS | 3040 | 34×30×40 |
| BIMETAL BUSHINGS | 1415 | 16×14×15 | BIMETAL BUSHINGS | 3215 | 36×32×15 |
| BIMETAL BUSHINGS | 1420 | 16×14×20 | BIMETAL BUSHINGS | 3220 | 36×32×20 |
| BIMETAL BUSHINGS | 1510 | 17×15×10 | BIMETAL BUSHINGS | 3225 | 36×32×25 |
| BIMETAL BUSHINGS | 1515 | 17×15×15 | BIMETAL BUSHINGS | 3230 | 36×32×30 |
| BIMETAL BUSHINGS | 1520 | 17×15×20 | BIMETAL BUSHINGS | 3240 | 36×32×40 |
| BIMETAL BUSHINGS | 1610 | 18×16×10 | BIMETAL BUSHINGS | 3520 | 39×35×20 |
| BIMETAL BUSHINGS | 1615 | 18×16×15 | BIMETAL BUSHINGS | 3525 | 39×35×25 |
| BIMETAL BUSHINGS | 1620 | 18×16×20 | BIMETAL BUSHINGS | 3530 | 39×35×30 |
| BIMETAL BUSHINGS | 1810 | 20×18×10 | BIMETAL BUSHINGS | 3540 | 39×35×40 |
| BIMETAL BUSHINGS | 1815 | 20×18×15 | BIMETAL BUSHINGS | 3550 | 39×35×50 |
| BIMETAL BUSHINGS | 1820 | 20×18×20 | BIMETAL BUSHINGS | 3820 | 42×38×20 |
| BIMETAL BUSHINGS | 1825 | 20×18×25 | BIMETAL BUSHINGS | 3825 | 42×38×25 |
| BIMETAL BUSHINGS | 2010 | 23×20×10 | BIMETAL BUSHINGS | 3830 | 42×38×30 |
The BIMETAL BUSHINGS is mainly used for medium load and medium speed oil lubrication or grease lubrication.Its typical application mainly has the engine connecting rod, the pin shaft, the engineering machinery chassis support heavy wheel, the support chain wheel, the guiding wheel, the hydraulic oil cylinder guide sleeve, the oil earring, the logistics machinery, the agricultural machinery and so on.Because the sintered copper alloy layer contains lead, the use of this product under certain conditions will be limited according to relevant laws and regulations.
